Would you rather have a .22 or .25 Air Venturi Avenger or should i wait for the Avenge X to come out and buy a Venturi off somebody cheaper than new price. Will be used for rabbits and birds around my garden due to making it quieter than my 10/22
I prefer to think of it in terms of effort per shot. A .22 cal running at 30fpe (e.g. 18gr at 860fps) will need about 3 pump strokes per shot. Of if you're just punching paper and can run it at something closer to 12 - 15fpe, you're only looking at 1 to 1.5 pumps per shot. Or a .25 cal running at 50fpe, 5 strokes per shot.How bad is it to pump one of these up with a hand pump? Dont have the funds for a compressor
Good to know. Thanks for infoI prefer to think of it in terms of effort per shot. A .22 cal running at 30fpe (e.g. 18gr at 860fps) will need about 3 pump strokes per shot. Of if you're just punching paper and can run it at something closer to 12 - 15fpe, you're only looking at 1 to 1.5 pumps per shot. Or a .25 cal running at 50fpe, 5 strokes per shot.
Exactly what im usingMy 25 caliber plastic stock Avenger really likes FX 25.39s. I had pumped it when I first got it and pumping it to 300bar was not fun. I think I only did it once. Mostly I pumped it up to 3000-3500. I would keep the regulator at 2000 psi or less and use pellets no heavier than 25.39s if you will hand pump it. That will give you a decent number of shots without the need to fill it to 300 bar. You can probably get 25.39s up to about 900 fps at 2000 regulator setting. 1800 might even be a better idea. If you place the shots well you won't have a problem with a 25 caliber pellet going over 800 fps.