Was shooting my RW and everything was going along as typically perfect, until I hear a loud pop and notice the pellet drop short. When I pulled the CARM single shot loader out, what appears to be the remainder of an o-ring and tiny piece of hard plastic came out with it (see below). I assume I have some form of breech seal issue? Any help would be appreciated.
Tuning .22 RedWolf HP issue
- Thread starter bdzjlz
- Start date
That’s an easy fix call AOA they will send you the correct size o ring. I use a Allen wrench, the short end and push the ring I place . Sometimes I put the o ring on the probe and slowly push closed. Good luck
Upvote 0
O-ring - Breech Seal.
Little piece of black plastic - ???
What does your CARM SSL look like? Missing any chunks?
Little piece of black plastic - ???
What does your CARM SSL look like? Missing any chunks?
Upvote 0
That’s your beach seal. 5x1.5 mm oring for your .22. Easy to replace if you remove the barrel, not to bad to replace if you do not remove the barrel.
If you remove the barrel to replace the breach seal, replace the 2 barrel orings(12x1 mm) also.
Butch
If you remove the barrel to replace the breach seal, replace the 2 barrel orings(12x1 mm) also.
Butch
Upvote 0
Many thanks to all that responded and all other AGN members with previous related posts.
O-rings and lube came in today and my Red Wolf is back to fully healthy and deadly accurate!
I love this forum!
O-rings and lube came in today and my Red Wolf is back to fully healthy and deadly accurate!
I love this forum!
Upvote 0