• The buying, selling, trading, or gifting of a standalone airgun moderator is prohibited in the Classified section. An airgun moderator may be included in your ad ONLY if it is "affixed" to the airgun. Please review the updated Classified Rules and Known Scammers List before engaging in ANY transaction.

Barrels 24" .177 Taipan Veteran barrel (carbon fiber sleeve)

Classified Status
WTS

Franklink

Member
Sep 3, 2017
4,750
2
6,131
AZ, United States
Feedback: 52 / 0 / 0
This is a one-off 24" .177 barrel that fits a first gen Taipan Veteran.

Lothar Walther, 1:17.7 with polygonal rifling. Slightly choked.

LW blank has been sleeved up to 15mm with carbon fiber and epoxied on brass end pieces.

Muzzle end has 1/2x20 threads and breech end has standard Taipan breech block threads.

Much lighter than full steel OEM barrel. Makes a Veteran balance very differently.

The carbon fiber sleeve consists of one piece that is 19.75" and a second piece that is 2.25" (see photo).

Due to the design of the Veteran, will work with a .22 Veteran or a .177 Veteran. Vets have extended pin probes so the larger diameter of the probe never makes it to the bore, so a .22 probe can be used with this .177 barrel. Vets also have a transfer port that is separate from the barrel, allowing you to use a .22 transfer port with a .177 barrel.

Please note that if using a .22 Veteran with this barrel, short .177 projectiles tip into the large dual transfer ports and make loading more difficult. If planning on dropping this into a .22 Veteran I'd recommend projectiles at least as long as a JSB 10.34.

$150 shipped. PayPal F&F or check/money order and we wait til the funds clear.


PXL_20240918_062225066.jpg

PXL_20240918_064732384.jpg

PXL_20240918_064920242.jpg
PXL_20240918_064902638.jpg
 
Last edited: