I came into some NSA slugs today and was concidering refitting my Dreamline to shoot them better. As of right now, the gun will put 3/5 in the same hole and then throw the other two wide right (2+ inches) at 50yds. No bueno but honestly better than I expected.
FX has two options for slug liners, the standard and the heavy. Realistically, I would like to stick to sub 30gr slugs so I believe the standard would be the right choice. I do have a box of the 33.5gr too though and am not sure if the heavy liner would be better.
As far as getting some extra oomph behind these slugs, I have a power plenum on its way. Reguardless of whether I stick to slugs or not, I probably should have installed this years ago. According to the numbers listed, I should be able to expect up to 65ftlbs with this installed. Is 60fpe a reasonable expectation with 26.8gr slugs?
Final question. Is the Huma dual port transfer port worth grabbing? Should I just toss it in just because? More potential air can't be a bad thing, right?
Thanks in advance for any and all advice!
FX has two options for slug liners, the standard and the heavy. Realistically, I would like to stick to sub 30gr slugs so I believe the standard would be the right choice. I do have a box of the 33.5gr too though and am not sure if the heavy liner would be better.
As far as getting some extra oomph behind these slugs, I have a power plenum on its way. Reguardless of whether I stick to slugs or not, I probably should have installed this years ago. According to the numbers listed, I should be able to expect up to 65ftlbs with this installed. Is 60fpe a reasonable expectation with 26.8gr slugs?
Final question. Is the Huma dual port transfer port worth grabbing? Should I just toss it in just because? More potential air can't be a bad thing, right?
Thanks in advance for any and all advice!