I plan on pulling the barrel and doing a good cleaning and breech oring replacement. Haven’t done either in the last couple thousand shots. Accuracy is still spot on but I thought I felt a little air from the breech area. It passes the tissue test. So maybe I am just feeling a little vibration on my cheek from the shot. Anyways, I have a couple questions. Both to do with the probe. When I cock the side lever and the probe slides into the breech, the probe slides back just a hair as the side lever locks into place. Also, when the probe is locked in the breech, I can wiggle it back just a little bit. I never noticed this in the past. Was wondering if it was just the linkage and needed to be like this so it doesn’t bind. Or if it was just getting worn and sloppy.
I have the reg set at 145 shooting NSA 33.5 at 890. Wheel at 7. Chrony shows 32 shots all within +/- 10 fps.
I have the reg set at 145 shooting NSA 33.5 at 890. Wheel at 7. Chrony shows 32 shots all within +/- 10 fps.