Shot this at 30 yards indoors with my custom .22 marauder. Barrel is a Crosman that I lapped and polished. JSB monsters at 920fps. 10 shots.
30 yards indoors
- Thread starter ajshoots
- Start date
It shot ok prior to any work. I have this gun tuned very well and only shoot groups within 1% or less ES and pellets are sized and rolled.
Upvote 0
Scary accurate for 10-shots....can't wait to see what it does at 50 yards! Great job! How much of a factor you think the pellet selection/rolling played in accuracy?
Upvote 0
This gun has shot multiple sub moa 50 yard groups outdoors and a few sub at 100 as well. The weather really sucked and I can only get 30 yards indoors. I rarely take pictures and after forgetting to take any pictures at yesterday's airgun show, I was trying to redeem glory and atleast get some pictures of today's activities. That was actually the only group I shot, so no cherry picking. Should have all been in one ragged hole, but dropped one a bit low. I will blame it on a slight hangover!!
Upvote 0
This gun has showed some improvement with sizing and rolling, but it is a small gain. Gain none the less.
Upvote 0
It's already up there...but I guess every small gain adds up eventually. With this accuracy at 30 yards you can choose which letter you want to hit on a dime
Upvote 0
That's an excellent group Aj. One of the smallest I have seen even at 30 yards. That gun's a keeper.
Upvote 0
Very nice!
Are you running a after market hammer?
I recently got a WAR SSG and just need to fine tune it.
Your shots are making me rethink my decision not to lap and polish my barrel. I seem to have gotten a good one and question the wisdom of messing with something that is not broke.
And 920FPS for JSB Monsters is moving!
Are you running a after market hammer?
I recently got a WAR SSG and just need to fine tune it.
Your shots are making me rethink my decision not to lap and polish my barrel. I seem to have gotten a good one and question the wisdom of messing with something that is not broke.
And 920FPS for JSB Monsters is moving!
Upvote 0
Pellets are sized in a sizing die both head and skirt. The rolling is the Yrrah roll method.
EDIT: Was busy at work and didn't have time to search earlier, hope the links help.
http://airgunnation.dev/topic/pellet-resizing/
http://www.network54.com/Forum/79537/thread/1301745606/Pellet+head+sizing++difinitive+discrimination++for+Jamie%2C+Tony%2C+Herb%2C++and+all+interested
Upvote 0
This gun has a reworked WAR valve and a gen1 WAR Hammer. It will shoot the monsters well over 1000fps if I crank it up.
Upvote 0
That is truly impressive AJ! You have to test the new Beasts out in that gun. I would be very interested in that!
Upvote 0
Thanks for the info. For hunting, I don't think I would go through this tedious process, but I can see the benefits for competition shooting.
Upvote 0