FX 380mm Crown .25 barrels

I actually prefer 500mm Crowns, and apparently a lot of people do or they'd be available. I do have a 380mm 22, that I just bought because I had never tried one. It shoots great, but I don't think it's any handier really. I think I'd be more excited if it was .177, and you could get the power out of the short barrel.
t. The 380 to me is just more handy to carry in woods,easier to shoot offhand and is more pointable if that makes sense. I dont mind the 500mm barrel and on the .30 380mm and 500 mm barrel I just got Im only seeing like 35fps difference in speed so far. The 380mm is avg 756fps and the 500 mm is right around 790fps, 56ftlb vs 61ftlb so not a huge difference.
 
  • Like
Reactions: swNCsw
I actually prefer 500mm Crowns, and apparently a lot of people do or they'd be available. I do have a 380mm 22, that I just bought because I had never tried one. It shoots great, but I don't think it's any handier really. I think I'd be more excited if it was .177, and you could get the power out of the short barrel.
I have a 380mm 177 for my crown. It's super . Will shoot slugs and 13.4 pellets,10.4 also. Single hole groups at 50 yards and depending wind at 100,but I have shot several 1 inch groups at 100 yards with it. I also have 500mm 22,and 25,and 600mm 30. I like the 177 the most. Good luck finding one,and if you do,buy it.
 
I have a 380mm .22 barrel kit I bought from an AGN member. I then put together a 380mm .177 barrel by buying the .177 380 liner (from Mundilar Airguns) and all the .177 parts needed to make a barrel except the shroud as it is the same for .177 and .22. All in all it was less expensive than buying the barrel kit.
Cheers,
Greg
 
  • Like
Reactions: DeanB
My 380 barrel in .22 is super accurate and my 380mm .30 barrel is also accurate with the JSB 44.75 .
If I cant find a used one may just buy a new one from Krale when they get them in, on their list to be notified.
With the 380mm there's room for a mod,and doesn't stretch out your gun to much. Wished all my crown barrels where 1
 
  • Like
Reactions: DeanB
i have been wanting a .25 380mm mk2 crown barrel for over a year !!
wish they would show up 😒
I am not that patient LOL ! I either make it myself ( more often than not ) or would have it made for me . ;) :unsure: .

I tried a few months ago to just simply pick up an extra mag , prob and pellets at one supplier to keep things simple . I had to order from 2 different places after searching for 2 hours with no luck haha.

Some older pics of my silly tinkering .

IMG_20230531_001538864.jpgleshiy classic sale.jpg
reduced to 30 percent.jpg
resized with arrows lol project.jpg

I later shortened the arrow shafts and played with it for about 6 months and then changed it up to something different .
I even had it shooting blow gun razor darts and broad heads for a while . I get bored a lot to say the least . I am no professional but I do have fun and entertain myself and the family haha .

:coffee:
 
Last edited:
  • Like
Reactions: Jimtx200 and DeanB