Diana 48/52, got the drooper mount and low zee rings....

Jump to latest Follow Reply
gendoc

gendoc

Member
Oct 28, 2018
2,087
1,876
Josephine Al. __ Lowest Bama Airgun hunter
but now i need a stock that has a raised cheek rest .....
left handed preferred. shot in the dark right !!
i have seen them lace up cheek rests, but really......:cautious:
20231204_172006.jpg
 
  • Like
Reactions: greenterror and Bennett
droop mount have been the go to mount for years
they used to have TO1 and TO5 i believe and that had a piece that dropped down in front of the dovetail so it could never move back
the TO6 mount does not have that and you can move it back as needed
there is nothing wrong with the RWS mount but there is nothing wrong with adding rings that you what either
there is more than one way to mount a scope to a Diana 48-52-54
now on the stock i have a BEC Eurolux Air Thunder rifle model 21 and it is a copy of the 48 and the stock is not even close to the same but saying that it doesn't mean other model 21's would not work, i can only compare what i have
i have a voodoo tactical cheek riser and i has a lot of option to it and they can be removed it could work i can try to mount it on a 48 stock and see for you
https://www.amazon.com/VOODOO-TACTICAL-Adjustable-Cheek-Carrier/dp/B007FTARKM?th=1

https://www.google.com/url?sa=t&rct...usg=AOvVaw3qntAiN5gL7dnfPetv-JfQ&opi=89978449​

https://www.google.com/url?sa=t&rct...usg=AOvVaw3qntAiN5gL7dnfPetv-JfQ&opi=89978449
 
  • Like
Reactions: gendoc
Upvote 0
c_m_shooter said:
What is the reason for the adaptor and weaver rings instead of the RWS Locdown mount? To me it just looks like another possible failure point.
Click to expand...
too much droop with anything over 8.7gr pellets using a my 6-18x44 vortex scope.
i changed scope to a Hawk 3-9x40, no difference in verticle adjustments.
and i do not like to be past 80% of adjustments anyway.
 
Last edited:
Upvote 0
If you want the Diana ZR mount it’s worth the money to get the Accurized version from Hector. I have two and both have been flawless. Comes with instructions on how to mount and on how to re-tune if that’s ever not the case. The HPM are model specific. He makes one for the 48/52 but it’s a custom order.
 
  • Like
Reactions: Rob MacRuger, Northwoods22 and beerthief
Upvote 0
cjtamu said:
If you want the Diana ZR mount it’s worth the money to get the Accurized version from Hector. I have two and both have been flawless. Comes with instructions on how to mount and on how to re-tune if that’s ever not the case. The HPM are model specific. He makes one for the 48/52 but it’s a custom order.
Click to expand...
there is a You tube on how to accurize the diana mount , very small allen set screws and a drill bit/ thread tap
 
  • Like
Reactions: Rob MacRuger
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu