Does anyone know if/when they will release a carbon sleeve for 800mm liners/barrels? The lack of them seems odd.
800mm Carbon Fiber Liner
- Thread starter Eaglehorn
- Start date
This makes no sense to me why they don't have one. Fx told me it was not needed because new barrel is tensioned with outer carbon sleeve.
That makes no sense. Yes the outer barrel is very stiff when under tension , but the liner itself ( the part the slug goes threw) is still supported by o rings and can bend itself and oscillate inside the stiff barrel under tension ... what am i missing
That makes no sense. Yes the outer barrel is very stiff when under tension , but the liner itself ( the part the slug goes threw) is still supported by o rings and can bend itself and oscillate inside the stiff barrel under tension ... what am i missing
Upvote 0
Made my Own.....
Used 2 600m barrel Carbon fiber sleeves that were on sale....
Cut one to length on my lathe.
Then using the barrel as an alignment jig, super glued the end together....
Used 2 600m barrel Carbon fiber sleeves that were on sale....
Cut one to length on my lathe.
Then using the barrel as an alignment jig, super glued the end together....
Upvote 0