I have a Hammerli Umarex 850. I was having trouble chambering a round and ended up taking the bolt housing apart and found a pellet had found its way into the housing and was blocking the bolt from fully chambering a round. Once I put it back together it will not fire. Pulling back the bolt will set the safety but when I release the safety the trigger will pull but not fire. What stupid thing could I have done or forgot to put back into place??
Umarex 850 Won't Fire
- Thread starter Maui_Time
- Start date
the good news is there are many posts that show the gut of this rifle
and what you did is unknown by any of us we were not there
there is one thing that is certain you are going to open it back up and fix it
and what you did is unknown by any of us we were not there
there is one thing that is certain you are going to open it back up and fix it
Upvote 0
Thanks for the picture. I think I see what might be wrong on mine. There looks to be a pin just to the right of the upper part of the trigger that it is resting on. That is missing from mine. Now I have to go on a search mission to find it...
Upvote 0
no that is a trigger mod not a factory part so stop looking
video is in French?? but it has the parts and assembly
video is in French?? but it has the parts and assembly
Last edited:
Upvote 0