A proper bench

While I really don’t enjoy shooting off of a bench, it can be a useful tool when testing different products and tunes.

For years I’ve shot off of a Lifetime (like Rubbermaid) portable table, then recently I purchased a Caldwell Stable Table. Both did ok for what they were, but I needed something less portable and sturdier.

I just bought this 2ft x 4ft bamboo and steel beast. It weighs about 50 lbs, is rated to hold 2000 lbs, is height adjustable, and has leveling caster feet. I haven’t shot off it yet, but I can tell that it’s not going to flex and change my POI from the slightest external input.

View attachment 510910

What kind of table have you found works best for you?
Now I am gonna end up doing another project.
Good sturdy set up you have.
Permission to copy this idea. Go run the store.
Make my own?
Thanks for sharing.
 
  • Like
Reactions: Michael
This one.
Plans on YouTube.
Rock solid.

Ipad Photos 164.jpeg
 
  • Like
Reactions: Ta-Ta Toothie
My home bench is my go to for dialing in scopes or testing various projectiles , both air gun and rimfire. I built the bench from plans readily available online and think it was one of my best investments. The first picture was at completion about 5 years ago . The second picture is today ( the blue tarp is a wonderful asset as a brass catcher when shooting my 10/22 ). A good shooting bench is a beautiful thing. Then:

View attachment 511003



and now :

View attachment 511004
Nice!
Our benches are almost identical in design.

I've added a patio umbrella and a repurposed bottle-jack as an adjustable rifle butt support. The patio stone provides a flat surface for the rest (some of the boards warped) and I use the log as an elbow support.

20240621_114754.jpg
 
The very best portable bench and even for a permanent setup is https://www.stukeysbenches.com/.
They are also the most expensive. When I purchased mine they were quite a bit less. Do not shy away, especially if you shoot expensive Airguns or powder burner, and already have a good air compressor, next get this bench. You will not be sorry.
Christmas list 🤩
 
I'm using a 20 year old picnic table that's rotting away. Its good enough. Stable if you sit in the right spot, but it needed to be replaced 10 years ago. And it isn't even comfortable. But it has inspired me to shoot more offhand or unsupported just to get away from it.
IMG_9916.jpg
 
I made left and right handed bench from treated 2x10", it sits on a 2x10 box frame and gives OK stability. I'll move my 50y backstop this next spring and pour a slab for a covered concrete bench.


View attachment 510917
Concrete slab on blocks is the gold standard of course. Also a major commitment.

I made myself something like the above made out of 4x4 posts and 2x6's. I was fortunate to have some old, straight, clean lumber in the shed that was perfect. It was just light enough I could flip it over and drag it to where it needed to move. There's something to be said for the stability of a wooden bench that is stiff and heavy.

I often shoot on a standard rectangular table at my shooting club. These are steel framed in 1" or 1.5" box beam with a synthetic lumber top. Again, very stable. I used to be a member at a club that had metal framed / plywood topped benches but the way the frame were constructed they would flex if you leaned on them. Fine for slapping down a sandbag and sighting it, but very hard to get good groups on them.
 
A D.O.A. Shooting bench is hard to beat.
There ok but like the Caldwell table / bench the seat is difficult to find a comfortable position, it is slightly under engineered, the Caldwell is a bit more stout but the DOA is much more portable. All tripod based benches share a common drawback, three long legs to trip over and bust your arse.
 
Concrete slab on blocks is the gold standard of course. Also a major commitment.

I made myself something like the above made out of 4x4 posts and 2x6's. I was fortunate to have some old, straight, clean lumber in the shed that was perfect. It was just light enough I could flip it over and drag it to where it needed to move. There's something to be said for the stability of a wooden bench that is stiff and heavy.

I often shoot on a standard rectangular table at my shooting club. These are steel framed in 1" or 1.5" box beam with a synthetic lumber top. Again, very stable. I used to be a member at a club that had metal framed / plywood topped benches but the way the frame were constructed they would flex if you leaned on them. Fine for slapping down a sandbag and sighting it, but very hard to get good groups on them.
One thing about concrete benches is they can’t accommodate the variety of human body types with different torso length and leg lengths… definitely not a short man’s happy place… and you better bring your own adjustable chair! Ergonomically speaking they haven’t designed a bench that can adjust to the human very well, so humans have to adjust to the bench 😏
IMG_8339.jpeg
 
  • Like
Reactions: dgeesaman
for outside I bought a caldwell shooting bench that came with a seat that was always too high or too low, so i drilled a hole in the concrete and mounted the table in the concrete and use my own stool. When i don't need the bench i pull it up and voila, free space. This I have the luxury of year round shooting, and from inside I’m somewhat stealthy when shooting a noisier Airgun
View attachment 511107
View attachment 511108
this is my inside set up.

View attachment 510914
drummers stool
 
  • Like
Reactions: cavedweller