I just ordered an Ace Venturi Avenge-X and was wondering if anyone could tell me what scope rings profile would be best. On my hunting rifles I always go with the lowest profile rings possible. However I have no idea of the clearance needed to allow the clip installation. Just trying to get a jump on the delivery of the gun. Thank you all in advance! It is a .22 Cal.
Ace Venturi Avenge-X scope ring profile?
- Thread starter KeliceR1960
- Start date
Kelice,
Air Venturi, not Ace Venturi, he's a pet detective. Seriously, Avenge-X comes with two different size magazines to accommodate scope mounting, higher mounted scopes allowing use of increased capacity magazine. Search, "Avenge-X," in upper right page corner, I'm sure specific information can be found. Best of Luck, WM
Air Venturi, not Ace Venturi, he's a pet detective. Seriously, Avenge-X comes with two different size magazines to accommodate scope mounting, higher mounted scopes allowing use of increased capacity magazine. Search, "Avenge-X," in upper right page corner, I'm sure specific information can be found. Best of Luck, WM
Upvote 0
Sorry, I just had to.
But in all seriousness, here's one way to find out what height scope rings you'll need. Make sure you have the clip/magazine installed and also the front objective scope cap to check for clearance.
ARC Ring Height – Short Action Precision
How to Determine Ring Height Step 1 Stack pennies on top of scope mounting rail. Use the same number of pennies in each stack. Step 2 Set and hold scope on pennies. Adjust number of pennies until scope is at desired height with adequate clearance to barrel. Step 3 If you use scope caps...
Upvote 0
I've got a new Avenge X and I used medium rings and a 1 inch scope. As worriedman said, you can only use the regular capacity mag. If you want to use the high capacity mag, you'll need high rings.
Joe
Joe
Upvote 0
