AliExpress has this 6.8L tank for about $225 with three different valves. New to PCP and related equipment. What valve do I want? I have a GX CS4-i compressor to fill the tank so DOT is not a concern. Just not sure what valve to order.
Acecare 300 bar carbon fiber tank, what valve?
- Thread starter Bayward
- Start date
Looks like it's supplied with a valve and a foster knockoff, you just need to finish the whip. Beware the chinese fosters are almost never in spec and are almost always chrome plated brass(they'll work, you can be as lucky about that as you like) . It states in the ad m18x1.5 thread so that will get you going on your search. I like the ones with a male foster out because all my bottles are standardized on that after I got a great white in trade.
Last edited:
Upvote 0
I have their dual gauge valves on two of their tanks, it's the black one, the first option on your screenshot. I like them because they have a one-way fill valve, and the second gauge that lets me know the tank pressure I prefer this to dead heading a single gauge valve. I can slow fill with them fine.
Upvote 0
I know my initial response was kind of unhelpful, that's what I get for posting when coworkers are asking me questions.
I'd go with the left side or center option. I have the one on the right as a standalone fill station and it's a mediocre setup. The one on the left is exactly the paintball fill stations you can buy in Amazon for 50 bucks and I have 3 of those (they're good enough and use more standard replacement parts) and the center one on closer inspection is where I would go if it were me. You will be replacing it one day, but that's not a huge ordeal. Guages get a memory and seals/burst discs go on the import stuff rather quickly.
Upvote 0
Yeah, I just got two more of that style to swap out existing ones. Way easier to use than the the rest.
Upvote 0