Adapter question for filling 4500 tank

[Ethompson777]

Hello, brand new PCP gunner here... I'm here in Colorado Springs, I've tried calling every paint ball center, scuba shop, welder supply shop etc and everyone only goes to 3000psi. The Airmarksman tank I got from Utah Air goes to 4500.

The only place that can get to 4500 is the fire department. I ordered the Air Venturi adapter but it's not getting a good seal and leaking air. I think they use a CGA347 system, but I can't find any other solution to go from a CGA347 to paintball foster connector. When I visited family in a different city, the scuba shop there just unscrewed my Airmarksman foster valve and screwed right into the stem to fill. The firehouse fill hose though is a female (with that stem sticking out in the middle) valve so that doesn't work.

Suggestions?

 

[Ranchibi]

Call Joe Brancatto at TopGunAirguns 714-907-0067 they are HPA specialists

 

[Ca_Varminter]

According to the Mfg description.. Your tank uses a DIN300 Valve....
So here is a CGA347 to DIN300 adapter. So you can fill any DIN tank at the a Fire Station fill-station!!
Good Luck,
Stuart

Stainless Steel Firehouse to Stainless Steel Male DIN300 Adapter

Our Stainless Steel Firehouse to Stainless Steel Male DIN300 Adapter will allow you to fill ours, or any other Carbon Fiber or SCUBA tank that has a DIN300 valve.

www.topgun-airguns.com

 

[Scotty1]

According to the Mfg description.. Your tank uses a DIN300 Valve....
So here is a CGA347 to DIN300 adapter. So you can fill any DIN tank at the a Fire Station fill-station!!
Good Luck,
Stuart

Stainless Steel Firehouse to Stainless Steel Male DIN300 Adapter

Our Stainless Steel Firehouse to Stainless Steel Male DIN300 Adapter will allow you to fill ours, or any other Carbon Fiber or SCUBA tank that has a DIN300 valve.

www.topgun-airguns.com

Great find, if only his prices were reasonable …

 

[Ca_Varminter]

Great find, if only his prices were reasonable …

That is why I miss Airhog.......Van prices were reasonable and parts were high quality!!

 

[Gerry52]

Have you thought about changing tank valve to a standard SCBA valve (cga347 threads)? I've seen scba valves as cheap as $25 on ebay. Most dive shops have the fill adapters for those. They're more robust than the Brancato valves imho. Designed to keep firefighters safe & alive.

 

[Freddy J]

I went through that, and the head aches were not worth it. Buy an air compressor and do it yourself.

 

[Gerry52]

Sent you a Private Message. DISREGARD: Just checked with Utah Airguns, SCBA valve won't fit.

 

[Gerry52]

SHOW PICTURES. If you're asking for help diagnosing something we need to SEE it so relevant info can be given.