Adapters

[ztirffritz]

I'm trying to finish up my airtank setup. I need to get the hose to talk to the tank valve. I need a 1/4" male NPT converted to I believe a 1/8" female quick connect. Can anyone point me to an online link that might supply such a device?

This is what I'm working with:

Tank Valve:
http://smile.amazon.com/gp/product/B00VKSPNTE?psc=1&redirect=true&ref_=oh_aui_detailpage_o06_s00


Air Whip:
http://smile.amazon.com/gp/product/B00K7Z0CYW?psc=1&redirect=true&ref_=oh_aui_detailpage_o05_s00


From AirHog I think I can do this:
I think if I take the male quick connect off of the whip I can use a 1/8" female/female adapter

connected to a 1/8"/1/4" male/male adapter

to connect the two.

 

[travels4fun]

This is a much better solution and is cheaper to boot:

CGA-347 Charging Kit w/ 1ft Microbore Hose w/o Quick Connect: $130
or
CGA-347 Charging Kit w/ 3ft Microbore Hose w/o Quick Connect: $140
or
CGA-347 Charging Kit w/ 1ft Microbore Hose with Quick Connect: $155
or
CGA-347 Charging Kit w/ 3ft Microbore Hose with Quick Connect: $165



All of the above can be found at Air Hog http://www.airhog.com/A9_Charging_Kits.html

 

[ztirffritz]

Agreed. I already have the fill valve and the hose though. I'm figuring this out as I go. If I had to do it again, I wouldn't bother with building my own fill assembly. I'd just buy it from Joe or AirHog. Back to my original question....

 

[ajshoots]

I would just call airhog or joe. Both should have the bits and pieces you need to complete your setup.

 

[DuncanHynes]

http://varmintair.typepad.com/varmintairs_blog/2011/01/pcp-airguns-so-what-are-these-tanks-hoses-and-adapters-about.html

I like this guy's setup. It is for getting air out of the tank. Filling it would need an adapter to suit a firehouse or paintshop pro shop.