i ordered direct from his site.
hes in croatia,
no us dealer that i know of.
not bad wait time though,
i ordered the mag 9 days ago and it showed up in new york today,
probably have it by the weekend.
Last edited:
Upvote 0
Add a bipod to Umarex Notos?
- Thread starter TacticalAnt
- Start date
i ordered direct from his site.
hes in croatia,
no us dealer that i know of.
not bad wait time though,
i ordered the mag 9 days ago and it showed up in new york today,
probably have it by the weekend.
It's about 4 days drive north east of Timbuktu.
Probably better if you just have it mailed.
Allen
Last edited:
Upvote 0
Years back I had an Ariakon Sim5 paintball gun. I would like to have a foregrip like that printed up for the Notos. It would be pretty sweet I think.
Well, any Mp5 based foregrip would look right at home on it.
Upvote 0
easier to just link this lol
www.airgunnation.com
bipod on a notos?......YES :)
well, took a bit on the belt sander, and needed a thin bit of foam rubber between the mount and tube as the mount (air venturi quiver and bipod mount from pyramyd) is 1mm larger in diameter than the tube on the notos. but it works :cool: bipod on a notos. i have another bipod mount for the...
www.airgunnation.com Upvote 0
This is on my Jet 1 not a notos but same idea. At first I ordered a single barrel shotgun mount off Amazon and it was just too small so I ordered a double barrel shotgun mount off amazon...and that was too big. However the screws that come with the double barrel kit are longer and if you use those with the single barrel kit it fits! Now I can add my foregrip or bipod.
Upvote 0
So did anyone get this one?
Apoear to just snap in giving a better foregrip too
I saw this on a YouTube short and wondering if anybody go it.
Allen
Apoear to just snap in giving a better foregrip too
I saw this on a YouTube short and wondering if anybody go it.
Allen
Last edited:
Upvote 0
Upvote 0
Izeebee
I have 3 of these in my possession one is a Notos and other 2 are PP750s. Almost all the parts interchange. Almost, The barrel does not interchange and the main block does not interchange
Remember you can always cut off the factory moderator and have a adapter made.
Allen
I have 3 of these in my possession one is a Notos and other 2 are PP750s. Almost all the parts interchange. Almost, The barrel does not interchange and the main block does not interchange
Remember you can always cut off the factory moderator and have a adapter made.
Allen
Upvote 0
Thank you! I am very new to all this and I wanted to grab my first pcp and try my hand at modding because it seems very fun to be able to get in the details of how my stuff works. Also making stuff look cool is fun!
Upvote 0
Thats a great vid! I'll say it again although I don't think it is understood. The reason the notos shoots above the specs is because the specs were basically off the pp750. Im pretty positive the pp750 barrel is nowhere as long as the notos barrel. The notos barrel continues further into that plastic moderator while the pp750 stops short of the end of shroud.
Allen
Allen
Upvote 0
I am interested in the conclusion of this experiment. Did the clamp work or maybe you
found different solution?
Upvote 0
I used a 34mm Saber Tactical clamp for awhile and it works good. But I swapped it out for this https://airgunarcheryfun.ca/pp750-long-bottom-rail/ so I could used a Magpul AFG as well as a bipod.
Upvote 0
How old is this NOTOS??? It has a pic rail on the bottom of the bottle and a right side lever to cock and load. Unless I am tired and slap happy...which I do need a little bit of a nap! I've been looking into fitting my Notos with a bipod, And would love for mine to load on the right!! I guess I am just wishing and hoping for something I could have!
Upvote 0