I own a FX DreamTac compact in .22 with the mk I & II 28mm shroud.
To facilitate the fitting of a powerplenum with the 28mm shroud, I made some custom cones for the superlight barrel.
I already made an internal silencer for a .25 liner with a longer shroud, see this reply.
Recently I've bought a .177 FX Crown barrel kit to fit on my DreamTac using the custom cone.
I purchased the Huma air high flow TP and probe for this kit.
Initially I wasn't planning on adding an inline silencer.
On assembly of the parts I saw, even with the original shroud there is an internal space in the shroud of 85mm.
So next step will be designing and printing an inline silencer for this barrel kit.
I will use the same K-baffle design as the internal .25 silencer I've made.
Overview of the setup
Room for internal silencer
Difference between original FX Crown cone and custom cone.
To facilitate the fitting of a powerplenum with the 28mm shroud, I made some custom cones for the superlight barrel.
I already made an internal silencer for a .25 liner with a longer shroud, see this reply.
Recently I've bought a .177 FX Crown barrel kit to fit on my DreamTac using the custom cone.
I purchased the Huma air high flow TP and probe for this kit.
Initially I wasn't planning on adding an inline silencer.
On assembly of the parts I saw, even with the original shroud there is an internal space in the shroud of 85mm.
So next step will be designing and printing an inline silencer for this barrel kit.
I will use the same K-baffle design as the internal .25 silencer I've made.
Overview of the setup
Room for internal silencer
Difference between original FX Crown cone and custom cone.
