EDgun Adjustable butt stock option for EDgun Leshiy ?

[ChickenDumpling]

Using the bottom and upper rubber plug locations, has anyone come up with an adjustable butt pad that would also allow the gauge to be seen?

I prefer to keep the scope as close to the barrel as possible, but the stock rides high in the shoulder. I can't help but think that someone has already created something for this slight inconvenience.

Hope everyone had a Merry Christmas too. Cheers, Norm

 

[bigHUN]

I tried at least a half a dozen scopes on L2, also collected a full box of any kind of picatinny mounts to raise the scope up to a proper and comfort level.
The Leshiy2 ergonomics is not just to mount any scope on it...you need to find one that fits you.
Also I removed a rear tube and cut off 45mm (on a CNC lathe) from a length to get a LOP for my posture.
So yes, to suit the L2 to yourself ... there are DIY also to purchase options.

 

[Scouty]

Norm as far as I know no such product exists. Unfortunate as I think the Leshiy2 needs it as much or more than the Leshiy Classic which of course had options from Carm as well as one from a Russian hobbyist.

I actually think that it would be pretty easy to do without blocking the gauge or the fill port knob. With the typical bottom tube arrangement one could probably make something that would clamp to the lower tube pretty easily and not increase the length of pull at all. Probably wouldn't be too bad with a bottle either but I'm not sure if all the bottles have the same neck diameter.

For what it is worth, I suspect that decreasing the length of pull on an L2 would make the lack of drop at the shoulder more comfortable. I have an adjustable stock on my Marauder Pistol and when I shorten the LOP I find it more comfortable to turn my shoulder in and up, if that makes sense.

I ordered some shorter upper air tubes from the Spanish site to experiment with this myself on my L2. I find the length of pull with the REPR plenum and stock upper air tube to be a bit long.