Adjusting regulator ?

Jump to latest Follow Reply
WorriedMan said:
AirArcher,
I recall he removed, adjusted, then re-installed. I thought his home-made regulator adjusting tool (long rod with Allen wrench taped to end) that allowed reg adjusting, with only removal of foster fitting, was pretty clever. Sorry video wasn't more helpful. Got my Airacuda Max .25 few days ago, still in learning curve. WM
Click to expand...
I hope you are fairing better than me. My .25 Max came in from PA , the Manometer adaptor is cross threaded into the main valve body and sits at 15 degrees to Port hitting the wood also has the fitment issues most others have. Looks like I have to send it back to PA. I really like a lot about the gun but may just ask for a full refund and not look back.
 
  • Like
Reactions: gendoc
Upvote 0
Singleshot,
Sorry to hear, send it back, for sure. So far, so good, for me. Wood stock seems dry, maybe from long delay to ship. Will try to re-constitute with proper oils. Louder and lower shot count than expected, will chrono but regulator gauge shows 2000 psi, around 2100 psi specs. Accuracy with JSB 25.39 grain is odd, groups well, then shifts to another area of target and groups there. Re-cleaned barrel and re-scoped, ready to try again. WM
 
Upvote 0
I’m just going to return the gun for a refund, then as we say back home in Mississippi “I’ll hide and watch a while” before ordering another. I really want the JTS venture to be everything we hoped for and successful . If you have not read the Airacuda Update thread , do so. You may need a spacer under the main valve body so the action will locate properly in the stock, the one I am returning would need it . Travis at JTS is having them made and sending them out.
 
Upvote 0
Singleshotcajun said:
I’m just going to return the gun for a refund, then as we say back home in Mississippi “I’ll hide and watch a while” before ordering another. I really want the JTS venture to be everything we hoped for and successful . If you have not read the Airacuda Update thread , do so. You may need a spacer under the main valve body so the action will locate properly in the stock, the one I am returning would need it . Travis at JTS is having them made and sending them out.
Click to expand...
I put 2 O-rings as spacers on the screw before putting it back on the stock, it works very well


I found the Standard to be very solid on all respecs
 
Upvote 0
AirArcher66 said:
I put 2 O-rings as spacers on the screw before putting it back on the stock, it works very well


I found the Standard to be very solid on all respecs
Click to expand...
Got the RMA,packed up the MAX, selected exchange for another MAX in .25 . Just got on PA and see , out of stock for the .25 . I’ll get back with PA for the refund, taking a break from this soap opera for awhile ;) If I decide to order a Standard I will do the ten for ten.
 
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu