Took my element apart to make sure everything was snug while looking at the crown I saw what looked like the barrel was washed out. What should I do to fix this as I don’t have anything to cut it and recrown it and looks like the air stripper is pressed on.
AEA barrel fix?
- Thread starter robertnadia84
- Start date
If I am interpreting what I'm seeing correctly, the lands are wiped out at the muzzle. If it meets your accuracy expectations, don't mess with it. Otherwise chop and recrown it. I've fixed many a barrel with the same kind of poor workmanship.
Upvote 0
Yeah today was only the second time shooting it since I got it in a trade . So still figuring it out have not even pulled the chrony out yet but got good group from about 2500 to 1500psi. I did shove a piece of foam from the packing down next to the spring to fox the twang when shooting worked great and already installed depinger.
Upvote 0
There are a few things I do want to do with the gun. Moderator to make it more quiet. Also either going For the reg or bstanley mod to waste less air. The adjustable tp does nothing for that but slows the pellet down if that’s what u want.
Upvote 0