AEA Aea challenger pro Cocking Lever

Took it out to the wood after walking around noticed cocking handle went missing
I try reaching out to UAG but they don't have one or know any aftermarket part I can use
Hoping to see if anyone know where I can fine one untill I find something that will work I just put a bolt on it for now
20250114_170307.JPG
 
If that’s a 1/4-20 bolt, try this. https://a.co/d/1xgA4op
I used it on my Bullshark.View attachment 529216
Aea, it's metric if i had to bet. My hp was.

Op, I could try to make you one if you have digital calipers or were willing to send me the cocking lever to make sure it's machined to a tight fit. You'd have to leave it raw aluminum or finish it yourself. If anybody has one to measure roughly, i could use the diameter and length.

This is only as an example. I made one out of aluminum as a prototype and final product was titanium for my dreamline. Black is oem, aluminum was prototype to check how it fit and if I liked it and the darker one is ti.

20250213_081430.jpg


20250213_081407.jpg
 
Took it out to the wood after walking around noticed cocking handle went missing
I try reaching out to UAG but they don't have one or know any aftermarket part I can use
Hoping to see if anyone know where I can fine one untill I find something that will work I just put a bolt on it for nowView attachment 529177
Put some Blue Loc-Tite on it or you will lose it again. After all, it is an AEA.....sorry just had to say that...Try reaching out to BinTac LLC. He might be able to help you out. Worth a shot anyways 🙊