I am having a issue my pcp is making a vibration noise and the air leaks out ???? Can anyone help ?
- The AGN App is ready! To compliment this new tech we've assigned the "Threads" Feed & "Dark" Mode. To revert back click HERE.
AEA Aea HP .25 semi
- Thread starter Coffee74
- Start date
I have a Aea Hp ss . When I try to fill with my compressor the air leaks out the barrel and. It makes a weird vibration noise ?? It will hold air until I try to add my magazine
Upvote 0
I am confused. You say it leaks out the barrel when you try and air it up. But also say it holds until you try and put in the magazine.
If it has zero air and you try airing it up you will need to cock the hammer back to get the pressure off the valve.
If that doesn’t work and air is still leaking out the barrel most likely the valve pin broke.
If it has zero air and you try airing it up you will need to cock the hammer back to get the pressure off the valve.
If that doesn’t work and air is still leaking out the barrel most likely the valve pin broke.
Upvote 0
Yes sounds like the pin valve. It could be dirty or possibly broken. As others have stated, if it’s cocked and takes air, then hammer pressure is holding the valve open.
Upvote 0
Think simply first, can you tear it down and put it back together? If so then begin to tear it down safely REMOVE ALL AIR. It could be as simple as an O-ring behind the tank and up in the receiver aera.
Last edited:
Upvote 0
If it's vibrating and leaking out the barrel your poppet valve has broken. Empty your tank and remove it. Above tank inlet there is a large plug with a slot. Remove that. Your poppet is inside.
Upvote 0