AEA HP O ring sizes?

[Spike_9]

https://www.aeaairgun.net/product-page/cf-aluminum-bottle-adapter-for-aea-hp-models

I am looking for o rings for the HP carbine. I was filling the gun and when I pulled out the probe, all the air in the tank when with it. I noticed that the orings on an the bottle adapter were torn but I can't verify what sizes AEA specs out. 

 

[MrP]

deleted - misread your post. 

 

[Spike_9]

I measured the groove diameter of the adapter which came out to be 14.05mm and the thickness of the stock oring which was about 1.7mm and went to oringsandmore.com and ordered the Metric Buna O-rings 14.0 x 1.78mm as they seem to be the closest to stock size I could find there. They seemed a little loose when I installed the bottle adapter into the receiver but the great news is it is holding pressure and I haven't seen any leaks at 250 bar fill.

 

[RangerReno]

Nice find with the o-rings website. Bought all the different sizes (as best as I could measure ) for my HPC. 160 rings for 5 bucks. Killer!!

 

[Spike_9]

They are my go to for orings. They ship fast and have great costumer service. 

 

[uladz]

They are my go to for orings. They ship fast and have great costumer service.

Thank you for posting about oringsandmore.com, great site, I was just looking for a set of o-rings to reseal AEA, just what I needed. Cheers!

 

[Spike_9]

Thank you for posting about oringsandmore.com, great site, I was just looking for a set of o-rings to reseal AEA, just what I needed. Cheers!

Good deal, glad it was helpful.

 

[HAX]

I measured the groove diameter of the adapter which came out to be 14.05mm and the thickness of the stock oring which was about 1.7mm and went to oringsandmore.com and ordered the Metric Buna O-rings 14.0 x 1.78mm as they seem to be the closest to stock size I could find there. They seemed a little loose when I installed the bottle adapter into the receiver but the great news is it is holding pressure and I haven't seen any leaks at 250 bar fill.

I just ordered some .. my Megalodon rear tank adapter is letting air out , and it’s depressing me . I tried other o Rings and zilch . If these end up working … my good sir , you have my gratitude and may all your dreams come true !! lol seriously thank you !