Air Venturi AEAC is decoding the Avenge-X in .22 caliber!
- Thread starter Airgun Nation
- Start date
Thanks thinking of shooting out the 18,s and going with the 25's going forward then maybe pushing speed up to 850 - 880Those are pretty decent groups dude, especially the 25,39 ones...
Upvote 0
Ok, I'm shooting the 25's at 895, they fly very well out of my gun at that speed.
Steve's got good results at 930 fps.
But I completely forgot JSB released the Monster Redesign Light as well, at 21 grain.
I'm getting andtrying those for sure as well....
Steve's got good results at 930 fps.
But I completely forgot JSB released the Monster Redesign Light as well, at 21 grain.
I'm getting andtrying those for sure as well....
Upvote 0
I’m the boring dude that shoots his as it came from the factory. Standard.25 Tube. Ground squirrels can’t tell if it’s been tuned or factory
Upvote 0
Hopefully tomorrow ill
Have some scope cam footage from my Avenge X .25 smokin some ground squirrels. I don’t want to hikack Steve’s thread so ill start a new one.
Have some scope cam footage from my Avenge X .25 smokin some ground squirrels. I don’t want to hikack Steve’s thread so ill start a new one.
Upvote 0
Very interesting stuff!
I recently got my .22 X and a mild day here in Canada let me get in some outdoor shooting. The rifle is in factory tune and not broken in yet but shooting decent out-of-the-box groups.
Looking forward to seeing more information on the Avenge-X!
I recently got my .22 X and a mild day here in Canada let me get in some outdoor shooting. The rifle is in factory tune and not broken in yet but shooting decent out-of-the-box groups.
Looking forward to seeing more information on the Avenge-X!
Upvote 0
Shot some JSB Monster Deep skirt (25.39gr) out of my Avenge-x .22 the other day. Here is a image of my target at 50 yards. Each one was shot 5 times.
Settings: 2500psi, HS +7.5, TP set to high.
Average FPS: 881
SD: 2.35
Extreme spread: 8
Getting about 40 shots on the reg. Edit: Forgot to note I have a carbon fiber bottle so you may have less shots with a tube.
I've had some really good luck with the JSB RS pellets at around 780fps. Seems like they would be really good for ratting around places you don't want to do damage. Only doing about 18fpe at the muzzle. I don't have any pictures of my targets with those but I'll say I took them out to 60 yards and they were doing good, although I had a lot of wind hold at that range.
Settings: 2500psi, HS +7.5, TP set to high.
Average FPS: 881
SD: 2.35
Extreme spread: 8
Getting about 40 shots on the reg. Edit: Forgot to note I have a carbon fiber bottle so you may have less shots with a tube.
I've had some really good luck with the JSB RS pellets at around 780fps. Seems like they would be really good for ratting around places you don't want to do damage. Only doing about 18fpe at the muzzle. I don't have any pictures of my targets with those but I'll say I took them out to 60 yards and they were doing good, although I had a lot of wind hold at that range.
Last edited:
Upvote 0
I hear Tyler Patten (hope I spelled his name correctly) say in some interview that yes, the new stainless steel regulator will fit in the original Avengers..
Upvote 0
Yokozona moderetor , I have one , works great.Steve has been updating his IG account with daily findings. Figured I'd share the "Cliff Notes" here for you to enjoy.
"Field Report - Last week's field work told me that 930 fps is "the number" for 25.4gr JSB Monster Redesigns Pellets in 5-8 winds. 915-920 works well too (and picks ya up some efficiency) but doesn't like winds past 3-4."
View attachment 440093View attachment 440092View attachment 440091View attachment 440090View attachment 440094View attachment 440099View attachment 440095View attachment 440097View attachment 440096View attachment 440098View attachment 440100View attachment 440101View attachment 440103View attachment 440102View attachment 440107View attachment 440104View attachment 440105View attachment 440106View attachment 440108View attachment 440109View attachment 440110View attachment 440111View attachment 440113View attachment 440115View attachment 440112View attachment 440114
Whose excited about Steve reviewing the .22 caliber Avenge-X? And what are you experiences with the .22 caliber?
Upvote 0
Well, mine is still giving fouling/flyer problems... a lot.
Steve's having success at 930 fps, mine totally maxes out at 895....
I'm now trying to get in touch with a dude on the dutch airgun forum, who has polished his barrel and chamber, and crowned the barrel as well.
He also slightly enlarged the TP, and is now shooting at greater speeds with less pressure...
Oh, and a friend of mine is printing me some spacers to stiffen up the barrel as well.
Does anyone know when the barrelkits are going to be available?
Steve's having success at 930 fps, mine totally maxes out at 895....
I'm now trying to get in touch with a dude on the dutch airgun forum, who has polished his barrel and chamber, and crowned the barrel as well.
He also slightly enlarged the TP, and is now shooting at greater speeds with less pressure...
Oh, and a friend of mine is printing me some spacers to stiffen up the barrel as well.
Does anyone know when the barrelkits are going to be available?
Upvote 0
Really appreciate the work you do and stating this part. It's is definitely frustrating for many of us who spend all our extra time and money to do just about everything possible with the factory offering just to find out the one Barrel was a dud, then to have to start the whole process again.
Allen
Upvote 0
Check the transfer port in the barrel. The transfer port in my liberty which uses the same barrel as the avenger but not the avenger X had burrs around it which damaged the pellet when loading. The lead is also crap and needs to be smoothed out.
Upvote 0
I'm pretty sure the liberty and freedom barrel is thicker. Donny fl avenger moderator adapter won't fit the liberty barrels.
Upvote 0
