AGT VULCAN 3 at 100 yards
- Thread starter FunGun
- Start date
Squirrel_getter,
I'm 100% with you on this one. While a dedicated pellet shooter with my other PCPs, the Vulcan 3 (.30 700mm) will be my slugger. I'll have to agree, the wood stock is a real work of art, however, for busting through these Florida thickets, only a synthetic, will do. Krales told me that AGN is working on a synthetic version now, but might take two, or more, months. That's OK as I have to save a little more to afford it anyway. WM
I'm 100% with you on this one. While a dedicated pellet shooter with my other PCPs, the Vulcan 3 (.30 700mm) will be my slugger. I'll have to agree, the wood stock is a real work of art, however, for busting through these Florida thickets, only a synthetic, will do. Krales told me that AGN is working on a synthetic version now, but might take two, or more, months. That's OK as I have to save a little more to afford it anyway. WM
Upvote 0
Sounds like that gun could benefit from installing a depinger. That’s actually a great way to describe the sound of some of these bullpups though.
Upvote 0
Don't think a depinger will solve anything as it's a regulated gun. What's being heard more than likely is hammer slapping the valve open. Definitely noticable but don't think it's that bad
Upvote 0
Mixer, that is impressive. Speaks well of the shooter's skills as well. Lets be honest though, were there a few butterflies in your stomach as you lined up for that last shot knowing you could blow a good group? 
well done!
Do you know your velocity?
well done!Do you know your velocity?
Upvote 0
i won one 50m benchrest with this vulcan 3. speed is 300~305 for 18 gr.
you can see photo in iran_benchrest page in instagram.
you can see photo in iran_benchrest page in instagram.
Upvote 0
I got my new v3 .22 with cleaned barrel filled with air on Friday night shot a few shots through through the chrony and it came in at 717fps with 26g slugs and 29.7FT Lbs, so I started work on it with excellent guidance from my very good pal, i adjusted the hammer spring and got it up to 956fps and 51 t lbs so I measured what the reg was doing and this was set at close to 100bar so stripped it out and adjusted it then re checked and was around 135bar then went on to re adjust the hammer spring and ended up with 1037fps and 62FT Lbs unfortunately due to crap weather I haven’t tried to set some groups yet but will soon…
oh and thanks you know who you are
oh and thanks you know who you are
Upvote 0
I'd like to add that the V3 is capable of big power in .22 and .25 but the valve and porting are too small for .30 to do the same. The design will stop most people from modifying it because the wall between the transfer port and valve seat is thin.
Upvote 0
I would drop Derrick Wall a PM at Zx10wall and ask him. He is tuning several and getting incredible results. I was amazed.
Upvote 0
I've done a few things to my .22 V3 700mm. I am at 69 FPE with 34gr slugs at 955 fps. These slugs do fit in the magazine 
It has a bit more power to give but I’m really pleased with MOA results to 140 yards which is the furthest distance I’ve currently shot it.
It has a bit more power to give but I’m really pleased with MOA results to 140 yards which is the furthest distance I’ve currently shot it. 
Upvote 0
Are the barrels & shrouds available separately? As in, buy a 500mm gun, then later swap to the 700mm?
Upvote 0
I've done a few things to my .22 V3 700mm. I am at 69 FPE with 34gr slugs at 955 fps. These slugs do fit in the magazine
What mods have you done?
I'm doing major work on mine at the moment.
Upvote 0
@zx10wall - Thanks, Derrick. That's unfortunate, but hopefully in the future they'll offer replacements/spares, or perhaps 3rd party choices. I was planning on a Uragan, but these days the V3 is looking more tempting.
Are the bottles a common thread, so you can already buy aftermarket?
Are the bottles a common thread, so you can already buy aftermarket?
Upvote 0