Is there any dealer that may carry a barrel and probe kit for a caliber change on the vulcan 3? Would be looking for a 700mm CZ barrel. Not poly.
agt vulcan 3 barrel and probe
- Thread starter rangur1
- Start date
I asked Derrick (@zx10wall) a few days ago about trying to buy a barrel for my Vixen. His response:
No, AGT will not sell just a barrel. The only way to get just a barrel is in the rare occurrence of a warranty issue. In which case, AGT requires the problem barrel back.
Hopefully, you'll get a different answer from someone else, but I wouldn't get my hopes up.
No, AGT will not sell just a barrel. The only way to get just a barrel is in the rare occurrence of a warranty issue. In which case, AGT requires the problem barrel back.
Hopefully, you'll get a different answer from someone else, but I wouldn't get my hopes up.
Upvote 0
The policy of AGT is not to have “their barrels” out of “their rifles”.
If you want them to sell you a new barrel you have to send them back the original one.
So nop, you won’t find an original AGT barrel as you are looking for.
Upvote 0
Is a custom TJ barrel an option (and someone machining the new probe - unless that's available from AGT)?
Upvote 0
CZ - 700mm crickets barrels aviable.. obviously it will need some machining..$300 + shipping and after machining you will end up with a way better product usually cricket barrels are almost 16mm ..unless they changed in the last few years .. where those vulcan barrels are to thin , and prone to harmonics problems..
Last edited:
Upvote 0
A TJ's barrel would be much better and shoot standard size ammo instead of the oddball sizes AGT uses. Should be around $170 for the barrel depending on length and then you need someone to fit it for you. The lead and port need to be cut, some type of crown and some other minor machine work.
If you can't find AGT parts in the USA Krale will sell you anything you want (I don't know about barrels) but you have to wait for them to order it from AGT then ship it to you. Prices are still good though. https://www.krale.shop/us/ email them.
If you can't find AGT parts in the USA Krale will sell you anything you want (I don't know about barrels) but you have to wait for them to order it from AGT then ship it to you. Prices are still good though. https://www.krale.shop/us/ email them.
Last edited:
Upvote 0
If you have space for it buy a lathe and start making your own parts. It's a fun hobby, keeps your mind active with math and gives you a sense of accomplishment when you create your own parts. A mill is nice to have also. Between the two you could build your own airguns if you want.
I misplaced my Vulcan 3 fill probe and the people that sell them want insane prices for them when they're in stock so I made my own tonight.
Cost less than $1 made from 303 stainless and I can leave it in there now. Just need to polish it up. Some retailers want $47+shipping.
I misplaced my Vulcan 3 fill probe and the people that sell them want insane prices for them when they're in stock so I made my own tonight.
Cost less than $1 made from 303 stainless and I can leave it in there now. Just need to polish it up. Some retailers want $47+shipping.
Last edited:
Upvote 0