Tuning AGT vulcan 3 Long, .30cal Regulator pressure, tuning

108 bar shoots a 55gr slug at 870 fps

120 bar shoots 55gr slug at 915 fps.

198 bar shoots a 70gr slug at 960 fps.

Shots per fill ~ I don’t know actually. At 108 bar, I’d imagine 70 shots. At 120 bar, maybe 55 shots. At 198 bar, 15 shots.
Did you turn the regulator to 198 bar? I turned mine 1/4 turn to the left and i have another hamerspring inside. The .30 is set out off the box at 170 bar i heard. Now the 54.5 grain Zan slug does 300 msec.
Vulcan 3 .30 700mm cz barrel. Next week i test the accuracy at 100 meter again.
 
Did you turn the regulator to 198 bar? I turned mine 1/4 turn to the left and i have another hamerspring inside. The .30 is set out off the box at 170 bar i heard. Now the 54.5 grain Zan slug does 300 msec.
Vulcan 3 .30 700mm cz barrel. Next week i test the accuracy at 100 meter again.
Yes, I’m a tuner and have a reg tester.
 
Thanks for the answer. How much did you turn the regulator?
All a a bit different bud. In general, if you make a mark on the reg’s adjuster and make a 12 o’clock, 9 o’clock, 6 o’clock & 3 o’clock on the body of the reg; treat the mark on the reg’s adjuster as a minute hand. Turn CCW 5 minutes to increase 10 bar.