Hi. I recently picked up a used (leaky!) Vulcan 3. Can someone please share the manual with exploded diagram and parts list? I have emailed AGT a few times but no response 
Thanks in advance!
Thanks in advance!
AGT Vulcan 3
- Thread starter gralex
- Start date
Do you know where it is leaking from?
If it is not clear try takin gall air out. Then take out the plenum and see if the regulator is in the front or in the rear.
If it is in the front, then the external o'ring of the regulator can be damaged. Just change them for new ones and Lubricante them with silicone grease. Put the regulator in the rear with the piece of tube at the very rear.
Reassamble, tight the degasing aleen screw and fill again in order to see if it do not leak anymore.
My Vulcan 3 700 mm 30 Cal damage the external o'rings of the regulator if I put in in the front (for large plenum).
If it is not clear try takin gall air out. Then take out the plenum and see if the regulator is in the front or in the rear.
If it is in the front, then the external o'ring of the regulator can be damaged. Just change them for new ones and Lubricante them with silicone grease. Put the regulator in the rear with the piece of tube at the very rear.
Reassamble, tight the degasing aleen screw and fill again in order to see if it do not leak anymore.
My Vulcan 3 700 mm 30 Cal damage the external o'rings of the regulator if I put in in the front (for large plenum).
Upvote 0
Coming from near where the bottle attaches to the cylinder. Hoping someone has the parts diagram so I can source seals. There was one in my Uragan but as I bought this secondhand it did not come with one. I'm shocked by the lack of support for AGT, multiple emails ignored...
Upvote 0
Have you try tighting the degasing screw?Coming from near where the bottle attaches to the cylinder. Hoping someone has the parts diagram so I can source seals. There was one in my Uragan but as I bought this secondhand it did not come with one. I'm shocked by the lack of support for AGT, multiple emails ignored...
Upvote 0
I wish somebody English speaking on Youtube would really dive into this platform and do fix vids. Doesn't seem like a difficult gun but i'm so not technical minded i need the "for dummies" version on just about everything... Awesome airgun!
Upvote 0
I did an oring list a while back. https://www.airgunnation.com/threads/vulcan3-oring-list-for-oringsandmore-com.1230835/Coming from near where the bottle attaches to the cylinder. Hoping someone has the parts diagram so I can source seals. There was one in my Uragan but as I bought this secondhand it did not come with one. I'm shocked by the lack of support for AGT, multiple emails ignored...
Upvote 0
So after getting this one up and running thanks to @Marco25 I have taken the plunge and pick up a Uragan 2 on Wednesday Does anyone have the same as above for the Uragan 2 so I can get ahead of the game with this one and stockup on o rings? Looking online I can only find the Uragan 1.
Does anyone have the same as above for the Uragan 2 so I can get ahead of the game with this one and stockup on o rings? Looking online I can only find the Uragan 1.Upvote 0
My Vulcan 3 hold its air just fine,,,, slightly modified on that side as it now have a FX carbon bottle, so i do not loose the air in that degassing it.
I would be interested in buying a O-ring kit for the Vulcan 3, but never seen one.
Funny thing though, lase i messed with the V3 a 3 mm steel ball came out of it ( rear end ) but thanks to no drawings of the damn thing i have no idea where it go, mind you the rifle function just fine.
I would be interested in buying a O-ring kit for the Vulcan 3, but never seen one.
Funny thing though, lase i messed with the V3 a 3 mm steel ball came out of it ( rear end ) but thanks to no drawings of the damn thing i have no idea where it go, mind you the rifle function just fine.
Upvote 0