Air compressor recommendations

[Hummer57]

Newb here. I need a compressor to fill three pcp’s. What is the most economical and efficient compressors to look at. I have a yong heng on order from Walmart and can return if something is better. I heard mention of a Hatsan (no oil type) but know nothing about that type.

 

[Humdinger]

There are many many threads on this forum that you can peruse through. This is a frequently asked question and has been covered quite a bit. 

The general consensus is that the oil free, 12 volt compressors are fairly unreliable for their cost. They are slow filling and aimed at direct fill users who don't mind waiting. The Yong Heng is much faster filling and is popular with guys trying to get the cheapest fast fill compressor. It helps if you have basic mechanical skills as they are easy to fix and parts are readily available.

 

[mrzip]

My 12 volt GX has been working fine for over a year. 

 

[biohazardman]

Although I am not a fan of most of the China made products this is a good one for the money. So, I will second the Yong Heng vote. I have two one recently retired at 2+ years and my back up that died in two months but only took a $12 part to fix and is now filling my tanks and guns. There are several models you want the Hardcopy or the Set Pressure models as they both have the cyclone water separator and fill to 4500psi. The Simple or Starter version does not have the water separator and the Autostop shuts down at around 3000psi.

https://www.aliexpress.com/wholesale?catId=0&initiative_id=SB_20200830195230&SearchText=yongheng+compressor

You will want a filter as well this is what I use and it werqs well.

https://www.aliexpress.com/item/32891898253.html?spm=a2g0o.productlist.0.0.6a2771f4pgP2Lr&algo_pvid=08176f9c-753d-40b8-bdf1-7aa80705e59a&algo_expid=08176f9c-753d-40b8-bdf1-7aa80705e59a-6&btsid=0b0a182b15988462111758096e3b02&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_

 

[shollz]

where did you pick it up at? are there vendors for alkin?

 

[Houli]

If your looking to get an Alkin compressor you might check with Ken (Sonny) if you're interested in ordering one. He's a member here and posts frequently. 

Yes there are Vendors but often seen as special orders. So I don't know who as a vendor has them in stock. 

Another member here was recently trying to sell one with 6 hours run time, JamesD, as a local pick up, but believe he was also a package deal.

Cheers

 

[T3PRanch]

I believe JamesD is an Alkin Rep!

 

[AlkinCompr]

Hi,

This is David from Alkin. We have stocks available in our warehouse. You can contact me: 8482191750.

 

[Bigragu]

Definitely a buy once, cry once, but smile forever compressor. I already told myself if I can swing it, one happy day, I’m going to get the vertical model W31 with auto purge and auto stop, and sell off my 2004 model with 38 hours on it. With as cluttered as my garage is, the vertical model will store better.

 

[Chuck-in-Ohio]

Definitely a buy once, cry once, but smile forever compressor. I already told myself if I can swing it, one happy day, I’m going to get the vertical model W31 with auto purge and auto stop, and sell off my 2004 model with 38 hours on it. With as cluttered as my garage is, the vertical model will store better.

I took delivery of a W31E vertical with auto stop and auto drain last week. It is all that, and then some.



Once you have it uncrated, you will be tickled with how easy it is to maneuver around. The weight is nothing to handle compared to the horizontal model, unless you have the horizontal on a cart, and it takes up far less floor space. The footprint of the vertical is only 18X22 inches.

 

[Chuck-in-Ohio]

I believe JamesD is an Alkin Rep!

Yes, he is a definite credit and asset to Alkin, and to all of us in the hobby.

One only needs to speak to him to realize that he is a straight on no BS guy who has the knowledge to back up every claim made about the Alkin compressors features, value, and longevity.

 

[Bigragu]

Ohio Chuck- thanks for letting me know of the footprint size of the vertical model, and also for getting me to salivate over that vertical W31 model, lol

 

[Bigragu]

I believe JamesD is an Alkin Rep!

Yes, he is a definite credit and asset to Alkin, and to all of us in the hobby.

One only needs to speak to him to realize that he is a straight on no BS guy who has the knowledge to back up every claim made about the Alkin compressors features, value, and longevity.

It was actually JamesD that schooled me on the Alkin compressors. What they were all about, life expectancies, robust features, etc. I knew nothing of what to look for in a compressor till we “met” thru a PM

 

[Hummer57]

YH compressor arrived yesterday. Set it up and ran it for 10 minutes. I’m going to run several 20 minute cycles and watch the temperature. Then change the oil. I have not hooked it to any guns yet. Any recommendations for using it properly are welcome. Also, where can I get a longer fill hose and am I looking for a particular kind?

Thanks all!

 

[Hummer57]

I’m back,

I got to YH compressors. One was $389 and the other was $349. Is there a difference? I haven’t opened the box on the $349 yet.

 

[JamesD.]

Editing out

 

[Hummer57]

I’ve been hand pumping for two weeks now and I shoot a lot. So 60 - 70 pumps per gun is wearing me out. I usually fill each gun twice per session. I’m 63, 5’8” and 160 lbs. and it’s definitely keeping me in shape. I feel the YH compressor will cover my needs for a good while.

 

[bubblerboy64]

I just purchased an Alkin W31 vertical. Ordered it Wednesday around noon had it wired and running this afternoon. They shipped it immediately and it traveled overnight to the YRC hub. Can’t beat that. 
First impression? This thing is pretty much the daystate 110 on steroids . If anyone wants to talk compressors send me a PM I have some experience and opinions. I think I can help you.

 

[JamesD.]

Thank you to all for mentioning me.

I wish to clear something up.

I'm a Alkin Marketing Rep, not a Dealer. 


I don't carry inventory. I may in the future. 
I was telling people about the quality they get with an Alkin. Yes, it's not a investment to take lightly but consider your $1800-$6000 airguns.

Would you rather have to have them all cleaned, maybe parts replaced, 10 years from now? Or hopefully just cleaned & resealed? 
The analogy is like that of a diver/firefighter breathing compressed, dirty smoky, oily air. 

Or E-quality, near Research Grade if an extra tower and filter were added. 
They can't be beat for the cost.

The analysis is from a Alkin in factory formation. No extra filters, towers, separator. 

Either new 2020 version of a W31, Horizontal or Vertical is same price. Buyers choice. 

 

[JamesD.]

Hi,

This is David from Alkin. We have stocks available in our warehouse. You can contact me: 8482191750.

Hey Folks,

Please welcome David with 100% trust, as he's not just "some guy" who happens to own an Alkin.

David is 100% verifiable & knowledgeable in all things Alkin. 

A full time Technician for Alkin w/ his Masters Degree. 

He's here to help everyone with any & all questions about their Alkin, & compressors in general. 
Alkin does have a website https://www.alkinus.com/ but; if you wish to talk he's available basic 9-5 hours, East Coast time zone. 

The Alkin Family respects & understands customer loyalty.

If you have a favorite Airgun Shop, who's also a Alkin Dealer. Hopefully they have what you want in stock. 
If not in stock, they can attain whatever you want within a month for you. 
If you wish to deal with David, he can take/place orders also.

Please feel free to check Alkin's Dealer listings. They're Worldwide and the #1 choice for The US Navy. https://www.alkinus.com/locations

Someone near your State/Country maybe carrying the exact model you wish to acquire immediately, & save you shipping costs.






I thank you all.

From those who have bought through me or helped me in anyway through the years. Be it a great deal, or a simple 1 minute answer. All is greatly appreciated. 
I'm willingly taking a break to spend more time with my 2 youngest of 9 children. Actually shoot in the early morning no wind period.
I'm selling off some PCP's, scopes, and accessories here before my leave.
I'm donating a PCP to David, if he is interested in knowing what the fuss is all about. 


Take care, be safe, shoot straight.