Air Forse Texan SS .357

Jump to latest Follow Reply
MP_usa said:
Hello guys
Can someone tell me what fps should I expect from Texan SS .357 with 125 grain slug? I can't find any speed related information on .357.
Click to expand...
@MP_usa You’re right. There isn’t much info that I have found with shot string data for the .357 Texan. Just a bunch of target photos. Here’s a thread where a post towards the end has handwritten chronograph data for the .357 Texan.

New to me Texan .357 at range

Well I bought a used Texan .357 from a AGN member then I put my Hiram 4-14x44 ffp scope on with BKL dovetail to picatinny adaptors I then bought some 127gr FP slugs and a Texan Short Shroud from Hunter Supply found a roll of camo tape in a box and put it all together to get this to do this at 60...
www.airgunnation.com www.airgunnation.com
 
Upvote 0
I just bought an SS and a Carbine.
My SS stock is anemic compared to the carbine.
I believe the SS I have has a weak spring.
But 130 grain stock I got 800 fps
The carbine gets 930 fps

Both of mine are most accurate with 150 plus grains.
Carbine with the donnyfl emperor V3 is a lil more quiet than the SS......but longer and more expensive.
 
  • Like
Reactions: crittahitta and Ezana4CE
Upvote 0
Bingo.. I am getting the same 830 fps.. You got both of them new? The second question - is there any difference between carbine and SS? I was under impression the only difference is the moderator which should not have anything to do with speed performance.. Thank you for your information - I will be calling Air Force tomorrow bace on your input
 
Upvote 0
MP_usa said:
Bingo.. I am getting the same 830 fps.. You got both of them new? The second question - is there any difference between carbine and SS? I was under impression the only difference is the moderator which should not have anything to do with speed performance.. Thank you for your information - I will be calling Air Force tomorrow bace on your input
Click to expand...
Same gun,barrel and internals just SS has the sound Loc system.
 
Upvote 0
MP_usa said:
Hello. I called Air Force today. They said that low 800 is correct fps - which is really low.. But how then your Carbine is doing good fps? Did you buy it new? Or may be it was power tuned by someone?
Click to expand...
I called today as well for a few reasons.
They claim the SS and carbine pushed a 170 grain at 790 fps
I believe that to be true if 150 grains are in the mid to upper 800's

I also believe that my SS barrel requires .358 or .359 to attain higher fps.
In the Carbine the .357 fit tight and I can barely push in a lil more than half of the slug

Same slug on the SS i can push it all the way in.

A tighter slug will build more pressure to keep the valve open longer just as a heavier slug will do the same

Once I get replacement parts in ill experiment.

Right now both my .357 which are brand new cracked the valve poppet in half and leak.

Causes are
To loose or lite of a slug.
Lite slug allows the valve to close faster slamming the poppet closed.
 
Upvote 0
Ok.. Did they tell you about the bullet size for the SS or you guessing? Yes - I sought its weird - but my bullet is getting completely in - so I can barely feel it with my finger.. And its not small bullet.. I have American Arms (Slayer ) - it loves these bullets! But - bottom line - you are sure that your carbine is doing over 930 fps with 130 grain slug -and that gun has no modifications to it? (because they said - you must be mistaking). I told them about you - when you called they must knew.. Did you talk to Max?
 
Upvote 0
MP_usa said:
Ok.. Did they tell you about the bullet size for the SS or you guessing? Yes - I sought its weird - but my bullet is getting completely in - so I can barely feel it with my finger.. And its not small bullet.. I have American Arms (Slayer ) - it loves these bullets! But - bottom line - you are sure that your carbine is doing over 930 fps with 130 grain slug -and that gun has no modifications to it? (because they said - you must be mistaking). I told them about you - when you called they must knew.. Did you talk to Max?
Click to expand...
Did not talk to max

They told me the Texan .357 actually needs .358
Then why isn't it a ".358"?
Told them no barrel manufacturer can mass produce every barrel identical.
I have two guns,same manufacturer......one fits .357 perfect the other fits it loose.

Note:
No two chronograph are the same.
My 850 fps may be a diffrent chronograph 820 fps

Humidity,altitude,lead hardness, temperature all play a part and vary results.
Yesterday I shot the 130 gr in my weaker texan at 880 fps.
Didn't try the stronger carbine cause the valve blew apart.
 
Upvote 0
MP_usa said:
Please keep me posted with your research on this topic
Click to expand...
No more research.
New valves on the way.
Made my own poppet last night and its working.

Airforce says this is the first they ever heard of this happening.

IMG_20241223_25511.jpg
 
  • Wow
Reactions: Ezana4CE
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu