Just got avenger 25cal what happens if you shoot when tank press falls below regulator setting
Air Venturi Air venturi avenger
- Thread starter Robert31415926
- Start date
I have an AvengeX. The output of the reg will just start dropping and the gun will behave like an unregulated gun, meaning the velocity will start to vary. I have shot down to around 1000 psi a few times and the gun worked fine. My reg is set around 1700.
Upvote 0
Thank you ,starting to learn pcp and I've never had bad advice from you guys I'm sure more questions coming thanks again
Upvote 0
Lol that was my first post here. Don't give me too much credit. But yes I do think 2900 is too high. Check this out: https://hardairmagazine.com/ham-columns/airgun-technical/lets-tune-the-air-venturi-avenger-part-one/
Upvote 0
Go watch the AEAC Avenger tuning video.
He's a wealth of airgun info in general but he has a specific Avenger video that will help get you where you want to be.
My reg is at 2100 and shoots 25gr pellets and slugs quite well.
FWIW, my .25cal was tuned using his settings as a base tune.
He's a wealth of airgun info in general but he has a specific Avenger video that will help get you where you want to be.
My reg is at 2100 and shoots 25gr pellets and slugs quite well.
FWIW, my .25cal was tuned using his settings as a base tune.
Upvote 0