Where do I get the right aftermarket o-rings for the max.I have what came with it but like to have quality spares. Thanks!
JTS airacuda max o-rings
- Thread starter UDABEGGER
- Start date
I believe on their website there is a schematic that shows all oring sizes if I remember correctly. Just have to write them all down and order them as JTS does not sell kits unfortunately.
Upvote 0
JTS Airacuda Max O Ring Seal Kit - Bagnall and Kirkwood Airgun Spares
Please Note: Generic Image Full aftermarket o-ring seal kit for the JTS Airacuda Max PCP airgun Select .177 (4.5mm), .22 (5.5mm) or .25 (6.25mm)
spares.bagnallandkirkwood.co.uk 
Upvote 0
I have the Airacuda Max .30. I need to replace the o rings. After reading all the forums I want to get highly quality o rings. Does anyone know if the rings are the same size for the .30 as the .22 and .25? There is no parts list with the owners manual and measuring with a micrometer is a pain. It’s is unresponsive so far Ste 3 weeks of emails and phone calls.
Upvote 0
there are large assorted size o-rings in metric on amazon . wish I had a better answer . also firewalkers post above
Upvote 0
Yeah. I ordered a set. They are all too thick in material for the diameter needed. I also noted that they are BUNA N70. Ideal according to what I have read for static locations in the rifle. The spare set that came with the rifle is hard as rocks. My experience with other o ring applications tells me not to trust them. They might have sat on a shelf too long. The owner's manuals for the .22 and .25 shows a very clear breakdown of location and size. That is why my question regarding the parts for the .30 is. Are they the same size in the rifle .30 excluding the breech where the calibre comes into play? I looked at Bagnall and Kirkwood. They don't show the sizes and again exclude the .30.
You can see the parts breakdown here if you don't have a manual for the .22 and .25
Upvote 0