Hello all . Does anyone have a condor ss apart that they could measure the bushing between the barrel bushing and the sound lock baffles? Thanks
Airforce Airforce condor ss help
- Thread starter Turboram
- Start date
The sound loc has a screw stopping the three baffles before the barrel....that distance would be hard to figure out.
Upvote 0
Interesting. My Condor SS has no such piece. There's a set screw entering the bottom of the barrel shroud about 4.83" from the muzzle end of the shroud (not counting the cap) that holds the baffles ahead of the barrel.
Seems like the spacer in the photo would rely on where the forward bushing on the barrel is located. On my original barrel that's 6.625" from the muzzle of the barrel. The pictured spacer seems much shorter.
I don't really recall, but my Condor is probably circa 2014. Under-rated platform, imo. They're great guns, especially with a little help from Talon Tunes. Mine was so awesome that it has cost me thousands in other PCP goodness.
GsT
Seems like the spacer in the photo would rely on where the forward bushing on the barrel is located. On my original barrel that's 6.625" from the muzzle of the barrel. The pictured spacer seems much shorter.
I don't really recall, but my Condor is probably circa 2014. Under-rated platform, imo. They're great guns, especially with a little help from Talon Tunes. Mine was so awesome that it has cost me thousands in other PCP goodness.
GsT
Upvote 0
My condor ss is 2016 and does not have that silver sleeve...is this a new version? Maybe something they added.
Upvote 0
I think I figured what that is...it's actually not for a condor ss. It's for a Talon ss so you can add that sound loc kit to a first gen talon ss that never came with baffles. The first gen had nothing so you slide that in first over Barrel so the baffles will not be against the barrel.
Upvote 0
All condor ss came with the sound loc already in them...d0nt shoot me if I'm wrong but I would bet on it. The only reason I new the talon ss didn't was because it was my first pcp and af offered that kit to upgrade .
Upvote 0
32.05mm
1,262in
That bushing sits against the first barrel bushing (from the muzzle) and spaces the first baffle in front of the barrel.
Upvote 0