AirForce pcp to co2 adapter

[optimal123]

I see they sell an adapter for 100+ to use co2 on the airforce talon. I was wondering why? I have a umarex gauntlet that came with an air tank, and I put a co2 tank on it day 1. Is the adapter needed or just an option to add length to your "stock". 



I do not know much about the air gun world so I apologize if this is a stupid question.

 

[MrP]

The adapter includes a valve and regulator I believe. So it’s not just a simple collar it actually replaces all the mechanism that is hit by the hammer.

 

[optimal123]

It looks like it just threads into the back. I imagine it has some sort of valve and possible regulator, Just wondering why I can use co2 on a umarex gauntlet w/o any type of adapter. Seems the same to me, pcp to co2. Again I don't know much at all which is why I was asking. Thanks for the reply. If anyone knows for sure, please comment. Thank you.

 

[MrP]

Maybe if gauntlet has a built-in regulator? My guess is that maybe the carbon dioxide can’t be shot straight out of the bottle so if the gun doesn’t have a regulator built-in then the CO2 adapter will have to.

also remember that with the Air Force guns, the valve stays with the bottle when the bottles detach.

the airforce adapter is an entire valve assembly and regulator you can screw on to an empty tank. 

 

[optimal123]

That makes sense. Thank you both for the responses.

 

[Rob_in_NC]

If I'm understanding you correctly, you are asking why the AF CO2 adapter is needed? If running CO2, the threads on a bulk CO2 tank is different than the threads on the AF HPA bottle. The HPA bottle has the valve on it, no regulator and when you unscrew the bottle, the valve comes with it. 

The CO2 adapter screws in the frame of the gun and has a valve (no regulator required for CO2, of course) and you can screw in a bulk CO2 bottle directly into that adapter. 

Lower velocity, of course, but lots of consistent low powered shots. 

 

[optimal123]

thanks for the reply.