• *The discussion of the creation, fabrication, or modification of airgun moderators is prohibited. The discussion of any "adapters" used to convert an airgun moderator to a firearm silencer will result in immediate termination of the account.*

Airforce talon upgrade

Jump to latest Follow Reply
Now I am not 100% sure as I have not had all the valves in my hand but.......
Thinking the TalonP has a regular old style Talon valve in it?
The Escape and the Condor are very very similar and higher power. With the Escape having a just slightly different shape but very slight (if any) difference in power output.
Not too certain on the exact hammer weight & spring tho several people do sell heavier hammer for those wanting MAX power. There may be a difference in the ringloc cap size: https://www.pyramydair.com/product/airforce-ring-loc-valve-pin-cap-kit-for-condor-condor-ss?a=8394

Stock my UL Escape (18" 12mm barrel) makes 76fpe turned up.

Pretty sure I have a 18" .25 12mm barrel around if you might be looking for a used one.

Fun little light rigs that group well.

John
 
Upvote 0
I can't answer your question but I do have a "Talondor" which was built years ago by someone else. I have since butchered it more than once. Now it is configured as a .22 with a .24 inch barrel shooting around 75 fpe but I can drop in a .25 12" or a .20 12" and have it shooting 35-45 fpe with a couple of spring changes and maybe a hammer change. The platform is eminently configurable. That is what I like about it.

BUT the reason I am posting is to suggest you MIGHT like the 12" barrel option because it allows you to install the AF K-Baffles which do a very fine job of quieting down the rifle. At 18", unless I am mistaken, you will need a different muzzle cap and an external moderator and if you need baffles, I can print some up for you.

Oh well if you do go with the shorter barrel you are going to want to add a bit of weight to the hammer. That short barrel does waste air.
 
  • Like
Reactions: mercado
Upvote 0
spysir said:
Now I am not 100% sure as I have not had all the valves in my hand but.......
Thinking the TalonP has a regular old style Talon valve in it?
The Escape and the Condor are very very similar and higher power. With the Escape having a just slightly different shape but very slight (if any) difference in power output.
Not too certain on the exact hammer weight & spring tho several people do sell heavier hammer for those wanting MAX power. There may be a difference in the ringloc cap size: https://www.pyramydair.com/product/airforce-ring-loc-valve-pin-cap-kit-for-condor-condor-ss?a=8394

Stock my UL Escape (18" 12mm barrel) makes 76fpe turned up.

Pretty sure I have a 18" .25 12mm barrel around if you might be looking for a used one.

Fun little light rigs that group well.

John
Click to expand...

Good evening John,
I am most definitely interested in that barrel. For some reason I can't figure out how to send a private message.
 
Upvote 0
Wolfie2nd said:
Talon tunes has been out of stock on all the good stuff for airforce. I wanted to do the .30 drop on conversion he has but it's been out of stock for a month plus or more
Click to expand...

While I am not sure if they sell the conversion you seek, I know pcptunes sells some items for AF guns. (I am not affiliated with them).
 
Upvote 0
Wolfie2nd said:
Thanks for everyone's input!
Click to expand...
Wolfie,
I believe it is just the 10 post minimum requirement and perhaps due to bot's or such logging it at night makeing 10 posts in seconds then lsting a full page of b.s. ad's the moderators now take a glance 1st ? I sent you a message just to see if it goes through. Even offered some "airgun friend" advice, LOL.

John
 
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu