• *The discussion of the creation, fabrication, or modification of airgun moderators is prohibited. The discussion of any "adapters" used to convert an airgun moderator to a firearm silencer will result in immediate termination of the account.*

Airgun Capital Moderator

Jump to latest Follow Reply
FLgunner

FLgunner

Member
Mar 4, 2017
2,056
1,780
66
Navarre, FL, United States
I had an older model Airgun Capital moderator that I had for a while sitting in my safe. I tried it on my FX DRS and it blew the end right off it. A quick e-mail to Airgun Capital, just to let them know it had failed, resulted in an offer to replace it with their new model.

The new moderator arrived a couple days ago, and I really like the new design. The old one was3D printed, the new one is all aluminum. I was originally thinking of using it on my DRS, but it’s a tad too small in the overall diameter, so it looked odd, but the diameter is perfect for my Crown! I replaced the Huma-Air MOD30 I had on the Crown with the new Airgun Capital moderator and it’s now stacking pellets hole in hole! It’s a tad louder than the Huma-Air suppressor, but I’ll take the tighter groups over a decibel or two!

IMG_4519.jpg


Below is a picture of a 3 shot group. These are JTS 18.1 grain pellets shot at 35 yards.


IMG_4518.jpg


Over all I'm very happy with the new moderator and very impressed with Airgun Capital's Customer Service!
 
  • Like
Reactions: Blueduck, SteveV, Air King and 5 others
Same here, first time I hear about them. And apparently their mod costs only $85! That's really cheap IMHO compared to other options out there. They also have .357 cal moderator for $105. Plus, customer service seems to be top-notch. I really need to try one of these. Thank you for sharing your experience and feedback @FLgunner! Link to this mod below:
airguncapital.com

1/2-20 UNF Airgun Suppressor

Airgun Capital's 1/2-20 UNF Suppressor for Up to .25 Caliber Airguns Compatible Calibers: .177, .22, .25, .30 Key Features: Sound Reduction: Significantly decreases noise levels. Easy Installation: Simply screws onto the barrel. Material: Made from durable 6061 T6 Aluminum. Enhanced Design...
airguncapital.com airguncapital.com
 
Upvote 0
FLgunner said:
I had an older model Airgun Capital moderator that I had for a while sitting in my safe. I tried it on my FX DRS and it blew the end right off it. A quick e-mail to Airgun Capital, just to let them know it had failed, resulted in an offer to replace it with their new model.

The new moderator arrived a couple days ago, and I really like the new design. The old one was3D printed, the new one is all aluminum. I was originally thinking of using it on my DRS, but it’s a tad too small in the overall diameter, so it looked odd, but the diameter is perfect for my Crown! I replaced the Huma-Air MOD30 I had on the Crown with the new Airgun Capital moderator and it’s now stacking pellets hole in hole! It’s a tad louder than the Huma-Air suppressor, but I’ll take the tighter groups over a decibel or two!

View attachment 463487

Below is a picture of a 3 shot group. These are JTS 18.1 grain pellets shot at 35 yards.


View attachment 463488

Over all I'm very happy with the new moderator and very impressed with Airgun Capital's Customer Service!
Click to expand...
i have 3 of these they work very well.
 
  • Like
Reactions: beerthief
Upvote 0
jarmstrong said:
I ordered one to try got 20 dollars off,,, on black friday sale $65
Click to expand...
This seems like an amazing deal. They have a great design, so I don’t know why they wouldn’t work well. I really don’t need another mod, but it can’t hurt to have another in the drawer when testing to see what a particular rifle groups better with. I had been considering buying one at regular price (basically half of what all others cost), so at $65, this really does seem like a no brainer.
 
  • Like
Reactions: Chief Ten-Beers and mariosjsk8
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu