Airgun Capital Moderator

[FLgunner]

I had an older model Airgun Capital moderator that I had for a while sitting in my safe. I tried it on my FX DRS and it blew the end right off it. A quick e-mail to Airgun Capital, just to let them know it had failed, resulted in an offer to replace it with their new model.

The new moderator arrived a couple days ago, and I really like the new design. The old one was3D printed, the new one is all aluminum. I was originally thinking of using it on my DRS, but it’s a tad too small in the overall diameter, so it looked odd, but the diameter is perfect for my Crown! I replaced the Huma-Air MOD30 I had on the Crown with the new Airgun Capital moderator and it’s now stacking pellets hole in hole! It’s a tad louder than the Huma-Air suppressor, but I’ll take the tighter groups over a decibel or two!

Below is a picture of a 3 shot group. These are JTS 18.1 grain pellets shot at 35 yards.

Over all I'm very happy with the new moderator and very impressed with Airgun Capital's Customer Service!

 

[Hold_Over]

I have the same aluminum model. Works great on the .22 I have it on currently. I did have some clipping on the .25 cal I tried it on initially. It is advertised for both calibers using the same device

 

[FLgunner]

Since this was a replacement, I didn't get to choose a caliber. The original one was .177/.22, the invoice they sent with this one just said .22, so it might be too small for a .25. It works great on my .22 Crown!

 

[Chief Ten-Beers]

Are they really Effective? I want Quiet as My priority. I have an Airacuda coming, and it's already supposed to be quiet, but just in case?

 

[FLgunner]

They are backyard friendly, maybe just a few decibels louder than the Huma-Air MOD30. The Airgun Capital mod is cheaper and I certainly wouldn't discount it as an option.

 

[Chief Ten-Beers]

Thanks for the Reply! I will know what it sounds like in a few days.

 

[kayaker]

Thanks for the post, as I never have heard of that company.

 

[Montana_Airgun]

Thanks for the post. Interesting manufacturer that I have just heard about. Would like to get one of them for testing and making a review out of it.

 

[uladz]

Same here, first time I hear about them. And apparently their mod costs only $85! That's really cheap IMHO compared to other options out there. They also have .357 cal moderator for $105. Plus, customer service seems to be top-notch. I really need to try one of these. Thank you for sharing your experience and feedback @FLgunner! Link to this mod below:

1/2-20 UNF Airgun Suppressor (.177 - .30)

Airgun Capital's 1/2-20 UNF Suppressor for Up to .25 Caliber Airguns Compatible Calibers: .177, .22, .25, .30 Key Features: Sound Reduction: Significantly decreases noise levels. Easy Installation: Simply screws onto the barrel. Material: Made from durable 6061 T6 Aluminum. Enhanced Design...

airguncapital.com

 

[Air King]

Sounds like a great company to replace it like that.