Alkin W31 Motor Problem need Help.

[Ta-Ta Toothie]

Im gonna bring it to a local rewinding shop hoefully they

 

[Ta-Ta Toothie]

Im gonna bring it to a local rewinding shop hoefully they

Duaaa.. I looked at your first post and the tag pictures . On the right side you see that "UF" thing with the 189-227 ? That's your cap info

I don't see a 70 but these 65 should do ..

Not a electrical expert....lol.

"220 volt " ones

https://www.amazon.com/s?k=189-227 mfd capacitor 220vac&i=aps&ref=nb_sb_ss_ts-doa-p_4_21&crid=XNZP29RNYZWT&sprefix=189-227 mfd capacitor,aps,516


Though best to read the actual on the cap info in the unit being they can't send you the correct motor. ..lol

Now with that

https://www.hunker.com/12413597/how-to-tell-the-difference-between-110v-and-220v

I assume your not running on 110 instead of 220 and seeing these issues?

If he is going this route, I highly recommend taking the information off the actual caps and take down the dimensions. Manufacturers vary on sizes even with the same ratings. Space is usually an issue fitting these in place. Also, not sure what they do over there in Europe, but here, we go by NEMA for motor listings and you almost never see the cap information on the motor nameplate.

 

[Ta-Ta Toothie]

It would be nice if the 110/220v got dropped for reference. I pretty darn sure those systems got phased out in the mid 90's. If you live in a residential dwelling, you got 120/240v.

 

[Hateful McNasty]

https://upgradedhome.com/110v-vs-120v/

Or

https://www.finnleyelectrical.com.au/is-220v-the-same-as-240v/



Of course if you rual area stone age grid as I am it's probably 90v

Anyway I assume your wired up at the plug for 220/240 running that..?

 

[miamiguy2017]

https://upgradedhome.com/110v-vs-120v/

Or

https://www.finnleyelectrical.com.au/is-220v-the-same-as-240v/



Of course if you rual area stone age grid as I am it's probably 90v

Anyway I assume your wired up at the plug for 220/240 running that..?

I gotta measure the voltage at my place. What voltage would be ideal?

 

[Hateful McNasty]

I gotta measure the voltage at my place. What voltage would be ideal?

That depends on your motor .. normal household is 110/120 ( like your tv or toaster plugs in to .).

220/240v. You need to use different and wire up for that

240-volt double-pole breaker. And whatever outlet for appliances plug .

Find and follow wiring up a "240v" rated breaker /outlet on line. Pretty easy .

 

[Ta-Ta Toothie]

Hire a licensed Electrician to make sure you have the proper circuit installed for the compressor. Replacing the caps like for like is one thing if you have the basic skills. Don't cut corners. Loss of property or life is at risk. Good luck.