Am I missing a pump part? (Gamo Urban with a third party pump)

[NoSteppy]

Pump I bought: https://www.ebay.com/itm/3-Stage-PCP-Air-Gun-Rifle-Filling-Stirrup-Pump-Hand-Pump-4500PSI-Pistol-Charging/283050929770?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649

This is my first PCP. I am having trouble getting the pump connected to it.

As you can see, both the hose nozzle and the adapter that came with the gun are both male, and the same diameter. Is the a part I can order to connect them?

 

[willy]

I think your all their?screw the quick release on the end of the pump hose,then the 4 nozzle to left screw onto the prob.Then sick the prob into the quck release?

 

[pcpfan37]

https://www.amazon.com/Air-Venturi-Quick-Disconnect-Female-Threads/dp/B004M37FYA/ref=pd_lpo_vtph_200_lp_tr_t_2/133-0533902-8376314?_encoding=UTF8&psc=1&refRID=A3BW4T80CDX78H0K0DE2

this is what u need for the threaded end of your urban fill probe 

then buy a quick connect foster fitting for the threads on your pump hose and your in business 

pcpfan37

 

[pcpfan37]

 

https://www.trenieroutdoors.com/gear/pcp-filling/air-venturi-foster-quick-disconnect-female/





//43d4c655-6fd3-4d0a-8ddc-a8b88b851817/imagejpeg

Here is what u need for your pump hose. Found this one at trenier outdoors but could probably find it at any pcp airgun retailer 

should get u going 

pcpfan37

 

[T3PRanch]

See if they will hookup as illustrated above. The white hard plastic rings in your pic are the "gaskets" that go between the fittings. The probe with the double o-ring of course plugs into the gun.

 

[Eaglebeak]

If it's a Chinese pump, the threads are probably M10x1. The probe requires a 1/8BSPP female to male foster. About $1.50 online or $10-$15 from your local AG shop or hydraulic supplies.