Here’s mine. I tried those Australian seals, but they didn’t work well. I cleaned up the original seal and I had to fix the locking mechanism as it wouldn’t lock up. Now all that’s left is to reblue and refinish the stock…but I got lazy and it’s just been sitting. It’s super accurate regardless.
So you’re going to have it re-blued? Wow let us know how it turns out. CZ631 is a keeper. What mount did you use for the scope
You can’t tell from the picture…but the previous owner was not kind to it. I wish I took a photo of it before fixing it up…looked like crap. I had to use 5 coats of boiled linseed oil to get the wood to shine and get some brighter coloring from the wood. Before, it was a grayish brown. The finish is black spray paint (previous owner)…
. Cold blue is better than black spray paint. ok BKL 254, i might get one but it shoots great without it. Truth is my eyes see blurry at the front sight and the target but i manage to do pretty good. LOLYou can’t tell from the picture…but the previous owner was not kind to it. I wish I took a photo of it before fixing it up…looked like crap. I had to use 5 coats of boiled linseed oil to get the wood to shine and get some brighter coloring from the wood. Before, it was a grayish brown. The finish is black spray paint (previous owner)…
I used BKL 254 mount.
Yep I like a scope. I get dime sized 25 yard groups with it. Mine is shooting 600 FPS with 7.3 grain JSBs. I’m using an OEM spring I got from Poland.
I have never been able to find a scope mount to fit correctly on the CZ, specs show 11mm for the mounts, I understand the CZ IS 13mm, how did you get it on?
The BKL mounts can be torqued wider. Skip to 1:23 mark on this video:
