There is no mag to barrel seal. You have to put the barrel in until it touches and then back it off 1/8 of a turn, maybe less, so that the mag rotates freely. Gap should be .010 inch or less.
I am not brave enough to open up my GKls , I am not gifted like a lot of you guys , I am all thumbs and no my limit.
Sorry magazine front cover little half round plastic thingie. Well things went a bit south magazine stop popped out, so I been struggling with it trying to get it back in place.
Front cover plastic c shaped thing is a gap filler to keep slugs from dropping into space around barrel. Part didnt exist on original K1's.
Is there a trick to it? Of course this was after doing this:
You are having about as much fun as I am.
Now this is one sexy looking gk1.How do you reset the striker properly? I thought I did it correctly, but when airing up at about 100 bar, I hear a clunk. Then I just get an air dump when pulling the trigger. I'm apparently not a quick study, as I've tried this three times in a row.
View attachment 514199
It's sure been interesting piece to work on lol. I'd sure like to see how that mag stop is installed in the factory. Lots of little moving parts lol
