Huben Any issues or problems with Huben gk1 please share your experience
- Thread starter windowtintz
- Start date
Mike
The JSB Hades fit loose in my GKI , I have some AEA 22 pellets on order if they dont fit tight in my gun I am sending it back to have the magazine replaced , Its going to be on my dollar if I send it back as I don't expect any warranty on this gun at all. I will post when the AEA pellets come in ,
Mike
Upvote 0
No se si serán iguales a los JTS, en mi 22 los que mejor asientan son los 22.07 , esos no se mueven después de disparar varias veces, siguen encajados y de precisión un 10.
Upvote 0
So I torture tested my gk1 with the new spring setup. Lots of rapid firing at high power levels. The spring held up great, however the rubber ring part around it got chewed up like has not happened before. Wondering if using a very sharp knife to cut a small bevel on the inside edge on each side might help
Upvote 0
New for mine anyway, I would imagine current ones come that way?
I mentioned it a few pages back, but here's the pic again
Last edited:
Upvote 0
Hay un vídeo nuevo en Youtube, otra válvula se ha roto de una v1, tirando con slugs a 200 yardas.
Creo que nos va a tocar algún día a todos.
Creo que nos va a tocar algún día a todos.
Upvote 0
Has anyone seen that new metal shroud on Krazcool website? Its all the way down on his webpage.
Upvote 0
Just saw this. Can't tell much from the picture, although it looks cool. Is it supposed to be quieter?
Upvote 0
With those vents in the front I don't think it could be used to quiet things down - which surprises me because it seems like one thing that airgun could use is a shroud that can hold some air.
Upvote 0
No it doesnt quiet things down. However the first vent is faux so it's not louder. I also just confirmed that all moderators will fit. additionally hes coming out with a red dot mount that goes with it.
Upvote 0
To date, 2400 pellets through the GK1 25 caliber and no real issues other than an operator error here and there letting the air get too low.
Upvote 0
same with me. I thought I just got a good one.. Hopefully Westerns pistol will be dependable because I heard otherwise
Upvote 0
Same with my V3 .25.
I’ll say it again……some people shouldn’t own a GK1.
Read the last 17 pages
Upvote 0
Mike, I am confused. I find it difficult to believe your magazine is faulty. Before you replace the magazine, please measure the magazine's bores with a precision pin gauge and get back to us on the forum. A pin gauge set has pins varying in diameter by .001". Most machine shops have these and would gladly measure your magazine's bores for you in a go/no go manner.
Upvote 0
Why send it back? Isn't it easier to just order a spare magazine and replace it yourself? The mag on the GK1 is very easy to swap out. It's only a few screws. Gregor has a full disassembly video on his channel.
Upvote 0
He hasn't been able to use any pelleys without them falling through. That's a faulty magazine, most pellet skirts are .220
If the AEA's don't fit I have an extra Huben magazine. I bought a .218 custom mag from Kelly for my k1 so I don't mind letting either of my factory mags go. They fit pellets just fine.
Upvote 0
There is no way to have a machine shop measure bore of magazine, Unless I want to pay 100 bucks, I am in the oil field nothing free everyone wants to get rich,, My 25 is such a breeze to shoot just push the pellet in rotate magazine and shoot,, Maybe I Was expecting to much from the 22 and thought it should shoot like the 25 , My mistake,, I was really wanting to add a 177 to the lot, But if there anything like the 22 GKl , I am going to pass ,,, i do not want a another pistol that I have load pellet and press in with a pen, I really like my GKl 25 it fun to shoot,, Funny I do not have to seat pellets in my Kl 22 rifle I bought new in 2023, But i shoot heavy JSB pellets in it, If I had the know how I would take out the magazine and have it powder coated or maybe better ceramic coated,
Used to have a lot of my Motorcycle parts ceramic coated , A very hard coating ,,,, I bet that would fix it,,
Mike
Used to have a lot of my Motorcycle parts ceramic coated , A very hard coating ,,,, I bet that would fix it,,
Mike
Upvote 0