I know they seem to be tricky to reset. Took me three tries. Need to push it in rather firmly. I used the end of a hex key to set it. Don't know if this is necessary, but I fired a round to complete the process. If I did a dry fire before the live fire, it undid my work! Once set, (using a live fire) it was then ok to dry fire.
Sorry to hear that. When you degas you should reduce pressure to reduce the violence of the degas out the back. And use a folded towel over the back to catch things. But if things are getting out of hand for you, perhaps it's best to send it for service. Then you can stop being frustrated. There's a lot of value to that.
I didn't realize that I needed to do that, the first two times. Then again, I didn't force things when pushing the striker. The third time, I watched the video again. Then saw Kelly's notes to pull the trigger AND reset the striker simultaneously.
The grip looks really good in my opinion.
www.airgunnation.com The v3 has a new design for the closing valve housing and the second screw on top of the reciever for all the regulated countries with lower power. Those are the two biggest differences between v1 and v3 that i know of. But his gk1 has a „V3.+“ marking, not the regular „V3“ marking. Like i said before, i‘ve never seen that.Huben - What's new with the GK1 v3+ ?
Does anybody know what, the actual improvements are? so far i could not find anything. (the screencap is from luchtbuks.com)
still wondering what the actual improvements are, could not find that out yet.
I didn't install the grip had problems with installing the shorty kit I bought from Kelly plus I had knocked the mag stop out of position. Kelly put his magic touch. Ask me if I wanted to try the new grips so I yes it and this is what I got back. Kinda reminds me of my old chrome plated llama .45.
Really? Where did you get the info from? (Just curious)
I really like the looks of the new grips , Nice cool looking short moderator , I got one it works great and looks super cool...
