Here's my pro500 I'm shooting in 25 cal. Bought it second hand on gunbroker. Couldn't say no to the wood on this one. It is doing well in the 25 to 100 yrd silhouette match we are shooting at Oklahoma city gun club.
Any Kral fans ?
- Thread starter Bassett
- Start date
I've always liked the looks of those rifles. That one does have nice figure in the wood!
What pellets & velocity you shooting? Does the rifle stay inside 2moa at 50yds?
What pellets & velocity you shooting? Does the rifle stay inside 2moa at 50yds?
Upvote 0
I shoot jsb 34 grn ,,,, 1 moa at fity. one moa at 75 and a hundred if the wind cooperates I'm still running alittle slow with these big ones running upper 800
Upvote 0
That's very good accuracy! Better than I expected you to report.
My recently purchased JTS Airacuda Std. won't stay inside 2moa consistently at 50yds no matter what pellet I feed it, or tune I run on the rifle. Just this week I was thinking about replacing the JTS with the Kral. Your accuracy report is making me lean hard toward buying the Kral.
My recently purchased JTS Airacuda Std. won't stay inside 2moa consistently at 50yds no matter what pellet I feed it, or tune I run on the rifle. Just this week I was thinking about replacing the JTS with the Kral. Your accuracy report is making me lean hard toward buying the Kral.
Upvote 0
Iv got the Kral Nite 25 hold air and shoots great"i only pump it up once a week"I got one manly because i got tried of filling the other up all the time,It just shoots""O" its running a Buck Rail only way to go"
Attachments
Last edited:
Upvote 0
Thanks for the pics! That target shows about 2moa for 25yds. If it would hold that for an average at 50yds that would be good enough for my intended use.
Upvote 0
Moa is 1inch at 100yrds , 1/2 @50, 1/4 at 25 that's a 25 cal pellet and those are 1 inch squares . Center to center I'd say that's a 1 moa target
Last edited:
Upvote 0
Yes, I see you are correct. I was looking at the second pic you posted without the reference of the pellet for perspective. My mistake, sorry.
That is for sure accuracy well above the price point for the Kral!
Upvote 0
Thank you , no worries. This was a rare day with no wind. I got lucky with this one my mega puncher in 22 won't do this.
Upvote 0
Yes, I have a Kral bighorn in .30cal. It’s a fun shooter. It only likes JSB and FX 44gr pellets so far, and JTS 45gr. Choke is too tight
Upvote 0
Krals are extremely underrated guns in today's PCP world,.....Guru for the gun is Troy Hammer here, unfortunately he doesn't post much anymore but if you need anything done to these guns or tips he's the MAN
Upvote 0
They are fun project guns. The good looks are there right out of the box. Once all the refinements are done, they are nice guns that shoot and feel like more expensive guns. I just sold one of my biggest Kral project guns. The dude loves it.
Upvote 0
Empire XS. Ok gun out of the box. Great gun after some significant refinements. And no regulator necessary.
Upvote 0
Guys say it shoots pretty good out of the box. But having owned other guns in this class, I tore the gun down right after I opened the box. Cleaned up all the Krals rough edges. Replaced nicked orings. Had to fix the runout on the air stripper. It was going to cause clipping. Very mild port job. Built a better poppet and a SSG. Then it was tuning time to find a balance between my fill pressures and how much spring tension to run with the SSG. My gun is probably 40+fps faster than a stock gun and still has a nice shot string.
Upvote 0
Conversed with Troy ( Hugh ) about a week ago. seems he took a job with Pyramid Air in OHIO sometime earlier in the year.
Upvote 0