My Maverick has developed a slow leak and I want to get it repaired. I can’t seem to find anywhere to repair it in the Pacific NW. Closest I found is Utah Airguns, but the turnaround time is 4-6 weeks.
FX Any Repair places in Oregon or Washington?
- Thread starter goldmaniam
- Start date
You might try contacting Joe Korick and see if he's doing any work on the FX brand. He's in the Vancouver area.
Upvote 0
Then one of the seals on the reg adjuster is bad, it's a 10 min fix. If it's leaking of the top it's the top o-ring.
The schematic sent has different hardness's i.e. NBR90 instead of NBR70, this makes sense except one is several mm thicker than possible in its location. The on-line schematic has the old durometer numbers but the right sizes. Numbers below correspond to the online schematic, with the right hardness, besure to lube them with something slippery
13) 10.0 x 1.5 NBR90 inside Regulator hole at bottom of threads
18) 7.5 x 2 NBR70 Regulator Body
20) 4.0 x 1.5 NBR90 End of Piston
23) 4.0 x 1.5 NBR90 Inside Regulator Body
25) 2.0 x 1.0 NBR90 (2x)
On the adjustment screw hold it reverse in the adjuster housing in a soft clamp then slowly stretch the #25 on, then the second one, be prepared to break a few.
Upvote 0
I just had to send it in for repair. Someone really needs to open a repair center in this area!
Upvote 0