I tried them, no go, but I did not try to increase the reg pressure at all, I had them shooting around 880 and they were all over.I need to try them in my EvoL HPS. Im currently using it simply as a slug gun as that was what it was intended for. I know it shots the 25 grain JSBs really well. At least before I tuned it. Its far to hot for them now, but something that heavy should work out.
Same no matter when I try them in any rifle!I've never had any luck with that particular pellet. I seems they are decent to 50 but any more and they fall apart badly.
Tom
What gun were you using?I tried them slow at 880-890 fps ...it was a scatter shot on the paper..didn't like this speed at all
Better results above the 970 range to around 1015..but you are pushing hard to get that much speed out of a .22
i used them in a Skout Epoch. I have a RTI P3 i still need to test outWhat gun were you using?
That's Awesome!View attachment 454466View attachment 454465View attachment 454464View attachment 45446325 shot groups at 50
And 50 shots at 100y.
Mike
What liner do you use? And can I get the those specific tune settings, like reg 1 and 2 , both hammer spring settings and the valve. I woukd really apreciate that. I've been wanting g to shoot those put of my m3 also with 800mm barrelI shoot the Beasts out of my M3 with the 800mm barrel at 990 with .700 to .950" groups at 88 yards. I get moa groups at 50 all day long. It's my go to for raccoons etc out to about 100 or so.