Anyone know what the Brocock Contour S6 threads are?

[ShootingNewB]

Anyone happen to know what the threads are on the end of the barrel for an S6? It's not the standard 1/2 UNF 

Apparently a milbro hugget moderator will screw directly into it.

Thanks

Jimmy

 

[Long_Gun_Dallas]

Might be m10x1.0?

Can you measure the width at least? 

 

[ShootingNewB]

Oh okay. That certainly can be done... Was just hoping someone might know off hand.

Any idea how to convert from (whatever it is) to something more traditional like the 1/2 UNF ?

 

[cea1960]

Long_Gun _Dallas is correct. I have an adapter for mine, but Neil Clague makes a great mod for it with 10mx1 threads. It even improved the accuracy.

 

[ShootingNewB]

Cea1960... Awesome, I'll reach out to him thank much for the lead!

 

[A_Rodriguez]

Anyone happen to know what the threads are on the end of the barrel for an S6? It's not the standard 1/2 UNF

Apparently a milbro hugget moderator will screw directly into it.

Thanks

Jimmy

Oh okay. That certainly can be done... Was just hoping someone might know off hand.

Any idea how to convert from (whatever it is) to something more traditional like the 1/2 UNF ?

You need an adapter from 10mm to 1/2 -20 then you can used any moderator 1/2-20 try Airgun Arizona I have the same gun and they sold me the adapter also try to get the plastic part that cicle the magazine is call the claw they ware ese and you gun would not cycle the mag

 

[mercado]

I have one adapter.. you pay shipping only $6 pm me if you're interested..

 

[ShootingNewB]

@mercado.... thank you kindly for the offer. I had a custom moderator built that fits directly to the 10mm threads so we're all good, but appreciate the feedback!