Anyone know where to buy the rubber O-ring for a Dreamline power plenum?

[Jlowe]

I bought one last week from Pyramyd Air and it didn't come with one. They sent me a second one today that didn't have one either. I called FX last week to let them know and never heard back. I called them today and left a message that the second one didn't have an O-ring either. Anyone know where I can buy one? 

 

[Ed24]

I always call FX USA in the morning and 9 out of 10 they answer the phone. If you haven't found what you need by tomorrow let me know and I'll pull the one I have on my dreamline and measure it for you.

 

[Emu]

Take the old one, go to an O'ring shop and buy 20 of them.

 

[Vetmx]

If you’re looking for the 26mm x 1mm I’ll send you a couple.

 

[Vetmx]

Just pm me your address and I’ll drop them off at the PO in the morning.

 

[Jlowe]

I did. Thanks for the help. 

 

[Bowhunter73]

I just placed a order with FX USA yesterday took 3 days for Scott to get back to me not bad for these days and times I ordered a new valve and seat for my dreamtact 30 and extra orings the plenum oring by the parts diagram is a 23x2.5. Scott told me if I'd had a sales receipts he could have warranty the parts but I bought it used so that's the way it goes.

 

[FX-USA]

Hi jasmlowe,

Someone should be reaching back out to you shortly. It also would be beneficial to use our website customer service link especially during the holidays we can get a little backed up. We apologize for the inconvenience.

Regards, 
FX Airguns USA

Contact

Monday - Thursday 9 AM - 4 PM EST
Fridays 9 AM - 3 PM EST
Phone: +1 866 639 0772
[email protected]


Customer service Website ticket link

https://fxairguns-usa.com/service-request/

This link is for Service request 

This link is to order parts

https://fxairguns-usa.com/parts-order/

 

[FelixS]

Do this:

I had a leak, so I tried adding an O-ring to where the plenum meets the bottle drop. It works.

 

[Mrshosted]

Dang

 

[monstr2]

Do this:

View attachment 188675

I had a leak, so I tried adding an O-ring to where the plenum meets the bottle drop. It works.

I tried adding an O-ring where the plenum meets the action but the leak has not stopped.