After shooting a few rounds through my Crosman 362 I would like to moderate it if possible. It is just a tiny bit too loud for my backyard urban shooting. Any ideas?
Crosman Anyway to moderate the 100 Year Anniversary Crosman 362?
- Thread starter orangeokie
- Start date
I put one on my c362 from TKO airguns, very nice product, I assume they would work on the anniversary model too.
Upvote 0
threesuns: I was looking at Buck Rail's website for a suppressor/moderator like the one in your picture. They sell the adapter but I can't seem to find a suppressor (their term for them) that has the fiber optic sight. Your setup keeps functionality and appearance of the original barrel. Which Buck Rail moderator is it? Or if not Buck Rail, can you tell who's and which model? Thanks. Scott
Upvote 0
Thanks. Guess I'm telegraphing my relative ignorance, but are there any moderators that have a fiber optic sight that'll attach to the female threaded DonnyFL adapter?
Upvote 0
Most adapters don't have a front sight attachment or set up for one, which is unfortunate.
To address the need for a front post I've used high quality adhesive tapes to adhere a front sight post to the adapter.
To address the need for a front post I've used high quality adhesive tapes to adhere a front sight post to the adapter.
Upvote 0
as pictured the adaptor has the front sight , just choose a mod to not block your front sight .
Upvote 0
Not sure it’s still available in that configuration. Wasn’t listed with a front sight on Donnys site.
Upvote 0
Thanks for thinking about this for me. If anyone has some combination of adapter and/or moderator that gives me a fiber optic sight please let me know. If there's no combo that works I'm picking front sight over moderation.
Upvote 0
It's designed to use the existing fiber optic blade from the Disco, attaches with a screw The front site attaches on the Anniversary 362 the same way, with a screw - the mod needs female 1/2-20 threads, the adapter is male, so study up on your airgun birds and bees ha ha -
Last edited:
Upvote 0
I'm starting to get it, maybe. 
Been bouncing back and forth between DonnyFL & Buck Rail sites. I think I'll order the A20 Disco adapter and hold off on a dedicated moderator for the A362. I have a the uni suppressor on a Dragonfly and an OEM Diana Chaser moderator I can try on the Crosman.
Regardless, the slightly longer sight radius with that adapter can't hurt and the visual aesthetics might be improved by the extra length.
Thanks all.
Been bouncing back and forth between DonnyFL & Buck Rail sites. I think I'll order the A20 Disco adapter and hold off on a dedicated moderator for the A362. I have a the uni suppressor on a Dragonfly and an OEM Diana Chaser moderator I can try on the Crosman.
Regardless, the slightly longer sight radius with that adapter can't hurt and the visual aesthetics might be improved by the extra length.
Thanks all.
Upvote 0
Ok, here's mine with the DonnyFL Disco/Maximus A20 adapter and Buck Rail 1/2" - 20 UNF suppressor. The Buck Rail is pretty big (~6.5 long & 1.2 in diameter). It doesn't look outsized on the rifle but does interfere with using the OEM sights.
I just ordered a TKO moderator for a Benjamin Maxumus from Airgun Mods (AGM) that's also 1/2" - 20 UNF but is only 4.5" long and 0.875" in diameter. The smaller diameter should work for using the open sights.
I just ordered a TKO moderator for a Benjamin Maxumus from Airgun Mods (AGM) that's also 1/2" - 20 UNF but is only 4.5" long and 0.875" in diameter. The smaller diameter should work for using the open sights.
Upvote 0
Not shot it yet, in part because I had to mow yesterday while it wasn't 55 and raining and in part because I broke down and ordered a PCP, my first (Crosman 3622, steel breech, pump, etc) and was fooling with that too. Based on my experience with that Buck Rail suppressor it should be quiet. I need to do that before the smaller AGM/TKO moderator gets here so I can un-scientifically compare them. But . . . more mowing need to happen first.
Upvote 0
DonnyFL has this adapter on their website. Is it the same thing as in your photo, and you just added the front sight to the adapter?
Crosman 2240 Adapter A30
This is a slide on adapter for the Crosman 2240. The ID measures 7/16 and it has 1/2x20 UNF threads to attach your favorite moderator with a knurled thread protector.
donnyfl.com Upvote 0
No, that one is different. Look for the A20 one for Disco & Maximus. I added you the oem front to that adapter. The A20 has 2 holes - one in front for the grub screw and one in the rear that's threaded for the Crosman sight screwDonnyFL has this adapter on their website. Is it the same thing as in your photo, and you just added the front sight to the adapter?
Crosman 2240 Adapter A30
This is a slide on adapter for the Crosman 2240. The ID measures 7/16 and it has 1/2x20 UNF threads to attach your favorite moderator with a knurled thread protector.
Upvote 0