Evanix AR6 pistol
- Thread starter TnCnDn
- Start date
Very short barrel with alot of power. It is going to need a shogun or ronin to tame that bark.
Upvote 0
I have the Duk Il Arms AR6 (same thing only older).
I have the stock moderator on the gun and it isn't too bad.
I have rifles that are louder.
The older AR6 like mine you are pretty much locked into the stock unit.
You would need to put in an extension to mount one of the universal over the barrel 1/2-20 adapters.
I have the stock moderator on the gun and it isn't too bad.
I have rifles that are louder.
The older AR6 like mine you are pretty much locked into the stock unit.
You would need to put in an extension to mount one of the universal over the barrel 1/2-20 adapters.
Upvote 0
Not much tuning on those hammers, it is a revolver style. Change hammer weight or the spring, but it is all a PITA. Alot of custom machime work if you are capable or have the means. Then it would also ruin the allure of the previous most powerful production pcp pistol.
Upvote 0
Mine was supersonic with 14.3, 38fpe, yours is pretty anemic then, the 2 i had both sounded lile a .22lr pistol
Upvote 0
There is a small oblongish rubber washer surrounding the firing pin.
Remove that and 970FPS
I'm actually okay with the 550FPS with it in.
That seems like a clever way to tune the pistol.
Don't know if that is a normal part of the pistol or not.
Upvote 0
It is not normal, someone had done thatto a buddie's, i ran into it coming apart and having to completely disassemble the action. It works, but i didnt like the after math and also had to talk him into using it as single action onlyalso, they like to break from too much double action usage. His was showing alot of ware. Excellent triggers on those guns though.
Upvote 0
Didn't think it was *normal*.
I also had to put a couple coils of spring in the fill valve to get it to close after filling.
Just to be sure the pistol fill is 200bar max?
I also had to put a couple coils of spring in the fill valve to get it to close after filling.
Just to be sure the pistol fill is 200bar max?
Upvote 0
I had a ars6 35 years ago and it was pretty much the same design.. it came with the rubber washer that went around the firing pin.. I actually compared it and it was identical to a cone shaped faucet washer..I actually made a spare, tried it and it worked well so I saved the factory one..
Mark
Mark
Upvote 0
I put it back in, 500FPS from a pistol is fine for what I want.
Less air, more shots is okay too.
Less air, more shots is okay too.
Upvote 0
I dont want anything only 500fps, but thats me. If it wont move a spinner, than I am out.lol. ia certainly.not tryimg a 30yd shot on rats and raccoons with one. I moved on long ago. They were fun when i had them though.
Upvote 0